|
 |
 |
|
 |
● Description
The Extron SC 210 is a 250 MHz (-3 dB) Video and Sync Converter/Stabilizer that is designed to provide a one-box solution for all sync routing combinations. The SC 210 accepts virtually any input sync configuration and converts it to any output sync configuration. For example, if RGBS is run through a system with a display device that requires RGBHV, a SC 210 would easily solve the problem while providing sync stability at the same time.
The SC 210 utilizes a built-in sync stripping circuit, which makes it ideal for eliminating costly cabling in matrix switchers by allowing all signals to route as RGsB (sync on green), and then be stripped for output as RGBS or RGBHV. The SC 210 can also be used as a sync stabilizer in applications for which there is noticeable jitter on the projected image.
● Features
- Converts virtually any input sync type to virtually any output sync type
- Strips sync on green
- Sync conversions
- RGsB input converts to RGBS or RGBHV output
- RGBS input converts to RGsB or RGBHV output
- RGBHV input converts to RGsB or RGBS output
- RsGsBs input converts to RGsB, RGBS, or RGBHV output
- Internal international power supply
|
● Specifications
| SC 210 Sync Processor/Stabilizer |
|
| Video |
| Gain |
Unity |
| Bandwidth |
250 MHz (-3 dB) |
|
| Video input |
| Number/signal type |
1 analog RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
5 BNC female |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
40 Hz to 140 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
2 V |
|
| Video output |
| Number/signal type |
1 analog RGBHV, RGBS, RGsB |
| Connectors |
5 BNC female |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-28 dB @ 5 MHz |
| DC offset |
±10 mV maximum with input at 0 offset |
|
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB |
| Input level |
RGBHV, RGBS (min./max): TTL/analog, 0.6 to 5 Vp-p
RGsB, RsGsBs (nominal): analog, 0.3 Vp-p |
| Output level |
TTL: 4 V to 5 Vp-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Max. propagation delay |
130 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
RGBHV, RGBS: positive or negative (follows input)
RGsB, RsGsBs: negative |
|
| General |
| Power |
100 VAC to 240 VAC, 50/60 Hz, 10 watts, internal, autoswitchable |
| Temperature/humidity |
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with optional shelf, #60-190-01 or 60-604-01 |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.75" H x 8.7" W x 9.4" D (1U high, half rack wide)
4.4 cm H x 22.1 cm W x 23.9 cm D |
| Product weight |
3.0 lbs (1.4 kg) |
| Shipping weight |
5 lbs (3 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| NOTE |
|
All nominal levels are at ±10%. | |
| NOTE |
|
Specifications are subject to change without notice. | |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
