|
 |
 |
|
 |
● Description
The Extron 13W3 DA2 is a one input, two output Sun and Silicon Graphics, 13W3 distribution amplifier. The 13W3 DA2 provides two separately buffered 13W3 outputs (female) allowing either two Sun or SGI monitors to be connected to one host workstation. It also allows for the connection of Sun and SGI computers to a compatible display, while viewing the workstation monitor. The outputs of the 13W3 DA2 may be extended to distances up to 100 feet (30 meters).
● Features
- Both outputs are buffered
- 300 MHz (-3 dB) RGB video bandwidth, fully loaded
- Compatible with Sun SPARC station and all SGI workstations featuring 13W3 connectors
- Routes all ID bits for compatibility with Sun and SGI workstation monitors in all resolution modes
- Rugged, metal enclosure
- Compact size
- External international power supply included (part# 70-055-01)
● Specifications
| Video |
| Gain |
Unity |
| Bandwidth |
300 MHz (-3dB), fully loaded |
| Video input |
| Number/signal type |
1 Sun/SGI RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
(1) 13W3 male cable (built-in) |
| Nominal level |
0.7V p-p for RGB |
| Minimum/maximum levels |
Analog: 0.3V to 1.5V p-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 145 kHz |
| Vertical frequency |
30 Hz to 170 Hz |
| Return loss |
<-42dB @ 5 MHz |
| Video output |
| Number/signal type |
2 RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
(2) 13W3 D female |
| Nominal level |
0.7V p-p for RGB |
| Minimum/maximum levels |
Analog: 0.3V to 1.5V p-p |
| Impedance |
75 ohms |
| Return loss |
<-50dB @ 5 MHz |
| DC offset |
±10mV maximum with input at 0 offset |
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output level |
TTL: 4.5V p-p |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Max. propagation delay |
H & V: 60 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative |
| General |
| Power |
100 VAC to 240 VAC, 50/60 Hz, 5 watts, external, autoswitchable; |
|
to 9VDC, 1 A power supply. |
| Temperature/humidity |
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
|
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing |
| Rack mount |
No |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.75" H x 4.6" W x 4.7" D: (1U high, quarter rack width) |
|
4.4 cm H x 11.7 cm W x 11.9 cm D |
|
(Depth excludes connectors.) |
| Product weight |
1.6 lbs (0.7 kg) |
| Shipping weight |
3 lbs (1.4 kg) |
| Vibration |
ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Compliances |
CE |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| (7.40-031303-D2) |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
