|
 |
 |
|
 |
∵ Description
The Extron P/2 DA2 WM F is a wall-mountable, one input, two output, high resolution VGA-QXGA distribution amplifier with audio. With 300 MHz (-3 dB) RGB video bandwidth, the P/2 DA2 WM F is compatible with VGA-QXGA graphic cards, monitors, and projectors. Each VGA output is individually buffered. The P/2 DA2 WM F accepts computer-video on a 15-pin HD female connector. Enclosed in a two-gang box, the P/2 DA2 WM F comes with a gray, black, or white wall plate and fits flush into a wall, podium, or table.
The P/2 DA2 WM F is available in an EC model that is compatible with European channel mounting systems. The P/2 DA2 WM F and the P/2 DA2 EC F include openings for up to four Extron single space Architectural Adapter Plates (AAPs). There are hundreds of AAPs available that offer various audio and video pass-through connectors for additional signal connections (AAPs sold separately).
∵ Features
Accepts all modes/resolutions of VGA-UXGA cards
ID bits routed to local monitor output
ID bit termination provided
Level and peaking help maintain signal integrity
Female 15-pin HD inputs and outputs
EC model compatible with European Cable channel mounting systems
P/2 DA2 WM and P/2 DA2 EC F includes openings for up to four single space Architectural Adapter Plates (AAPs)
External international power supply included (part# 70-055-01)
∵ Specifications
| P/2 DA2 WM F Series |
|
| Video |
| Gain |
Switchable: 0 dB, +1.2 dB, +2.2 dB
(0.7 V, 0.8 V, or 0.9 V when input is 0.7 V and the gain/peaking switch is set to Unity, 50%, or 100%, respectively) |
| Bandwidth |
300 MHz (-3 dB), fully loaded |
|
| Video input |
| Number/signal type |
1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
(1) 15-pin HD female |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.4 V to 1.4 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 135 kHz |
| Vertical frequency |
30 Hz to 170 Hz |
| Return loss |
<-38 dB @ 5 MHz |
| DC offset (max. allowable) |
200 mV |
|
| Video output |
| Number/signal type |
2 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
(2) 15-pin HD female (1 display, 1 local monitor) |
| Nominal level |
0.7 Vp-p for RGB at unity gain |
| Minimum/maximum levels |
0.4 V to 1.4 Vp-p |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset |
÷5 mV maximum |
|
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs |
| Input level |
3.0 V to 5.0 Vp-p |
| Output level |
TTL: 5.0 Vp-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
40 ohms, typical |
| Max. propagation delay |
18.8 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
|
| Audio |
| Gain |
Unbalanced output: 0 dB, balanced output: +6 dB |
| Frequency response |
20 Hz to 20 kHz, ÷0.05 dB |
| THD + Noise |
0.03% @ 1 kHz at nominal level |
| S/N |
>90 kHz, balanced, at maximum outpute |
|
| Audio input |
| Number/signal type |
1 stereo, unbalanced |
| Connectors |
(1) 3.5 mm female stereo jack, 2 channel; tip (L), ring (R), sleeve (GND) |
| Impedance |
>5k ohms unbalanced, DC coupled |
| Nominal level |
-10 dBV (316 mV) |
| Maximum level |
+8.5 dBu (unbalanced) at 1% THD+N |
| NOTE |
|
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≒ 2 dBu | |
|
| Audio output |
| Number/signal type |
1 stereo, balanced/unbalanced |
| Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Maximum level (Hi-Z) |
>+15 dBu, balanced or unbalanced at 1%THD+N |
| Maximum level (600 ohm) |
>+9 dBu, balanced or unbalanced at 1%THD+N |
|
| General |
| External power supply (included) |
100 to 240 VAC to 12 VDC, 1 A (max.) external power supply, regulated |
| Power input requirements |
12 VDC, 0.2 A |
| Temperature/humidity |
Storage: -40 to +158 ▲F (-40 to +70 ▲C) / 10% to 90%, noncondensing
Operating: +32 to +122 ▲F (0 to +50 ▲C) / 10% to 90%, noncondensing |
| Rack mount |
No, but wall- or furniture-mountable |
| Enclosure type |
Metal |
| Enclosure dimensions |
|
| P/2 DA2 WM F |
| Plate |
4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang) |
|
| P/2 DA2 WM F AAP |
| Plate |
4.5" H x 8.3" W x 0.1" D (11.4 cm H x 21.1 cm W x 0.3 cm D) (4 gang) |
|
| P/2 DA2 WM EC F |
| Plate |
3.1" H x 4.0" W x 0.1" D (7.9 cm H x 10.2 cm W x 0.3 cm D) (Euro Channel) |
|
| P/2 DA2 WM EC F AAP |
| Plate |
3.1" H x 7.7" W x 0.1" D (7.9 cm H x 19.5 cm W x 0.3 cm D) (Euro Channel) |
|
| All models |
| Box |
2.6" H x 3.7" W x 1.6" D (6.6 cm H x 9.4 cm W x 4.1 cm D) |
|
| Product weight |
|
| P/2 DA2 WM F |
0.4 lbs (0.2 kg) |
| P/2 DA2 WM F AAP |
0.6 lbs (0.3 kg) |
| P/2 DA2 WM EC F |
0.3 lbs (0.1 kg) |
| P/2 DA2 WM EC F AAP |
0.7 lbs (0.3 kg) |
| Shipping weight (all models) |
2 lbs (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| NOTE |
|
All nominal levels are at ÷10%. | |
| NOTE |
|
Specifications are subject to change without notice. | |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
