| MLS 304 Series and MLS 406 Series |
|
| Video |
| Gain |
Unity |
| Bandwidth |
280 MHz (-3 dB) |
| Differential phase error |
1.0º at 3.58 MHz and 4.43 MHz |
| Differential gain error |
1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk |
-68 dB @ 10 MHz, -39 dB @ 100MHz |
| Switching speed |
5 ms (max.) |
|
| Video input and loop-through |
| Number/signal type |
|
| MLS 304 Series |
2 RGBHV, RGBS, RGsB, RsGsBs
1 RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through
2 composite video |
| MLS 406 Series |
3 RGBHV, RGBS, RGsB, RsGsBs
1 RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through
3 S-video
3 composite video |
| Connectors |
|
| MLS 304 Series |
2 female 15-pin HD (RGB), 1 female 15-pin HD (RGB loop-through)
2 female RCA (composite video) |
| MLS 406 Series |
3 female 15-pin HD (RGB), 1 female 15-pin HD (RGB loop-through)
3 female 4-pin mini DIN (S-video)
3 female BNC (composite video) |
| Nominal level |
1 V p-p for Y of S-video, and for composite video
0.7 V p-p for RGB
0.3 V p-p for C of S-video (MLS 406 Series) |
| Minimum/maximum levels |
|
| RGB |
Analog: 0.3 V to 1.5 Vp-p with no offset |
| S-video, composite video |
Analog: 0.4 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 145 kHz |
| Vertical frequency |
30 Hz to 170 Hz |
| Return loss |
|
| RGB |
<-40 dB @ 5 MHz |
| S-video |
<-25 dB, 0 to 10 MHz |
| Composite video |
<-40 dB, 0 to 10 MHz |
| DC offset (max. allowable) |
1.5 V |
|
| Video output |
| Number/signal type |
|
| MLS 304 Series |
1 RGBHV, RGBS, RGsB, RsGsBs (follows input)
1 composite video |
| MLS 406 Series |
1 RGBHV, RGBS, RGsB, RsGsBs (follows input)
1 S-video
1 composite video |
| Connectors |
|
| MLS 304 Series |
5 female BNC (RGB)
1 female BNC (composite) |
| MLS 406 Series |
5 female BNC (RGB)
2 female BNCs (S-video)
1 female BNC (composite) |
| Nominal level |
1 Vp-p for Y of S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for C of S-video (MLS 406 Series) |
| Minimum/maximum levels |
|
| RGB |
Analog: 0.3 V to 1.5 Vp-p (follows input) |
| Composite video |
Analog: 0.4 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-40 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| Switching type |
Triple-Action (RGB delay) |
|
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Input level |
2.0 V to 5.0 Vp-p |
| Output level |
TTL: 5.0 Vp-p, unterminated |
| Input impedance |
10k ohms |
| Output impedance |
75 ohms |
| Max input voltage |
5.0 Vp-p |
| Max. propagation delay |
30 ns |
| Max. rise/fall time |
4.0 ns |
| Polarity |
Positive or negative (follows input) |
|
| Audio |
| Gain |
Unbalanced output: 0dB; balanced output: +6dB |
| Frequency response at 1 watt output |
|
| Preamp/Lineout |
20 Hz to 20 kHz, ±0.5 dB |
| Direct (4/8 ohm) |
20 Hz to 20 kHz, ±1.0 dB |
| Transformer (70 V or 100 V mono amplifier) |
50 Hz to 20 kHz, +0 dB/-3 dB |
| THD + Noise |
|
| Power amp (mono or stereo) |
|
| 8 watts/8 ohms |
<0.05% @ 1 kHz, 20 kHz bandwidth |
| 12 watts/4 ohms |
<0.25% @ 1 kHz, 20 kHz bandwidth |
| Preamp |
<0.110% @ 1 kHz, 20 kHz bandwidth |
| Lineout |
<0.025% @ 1 kHz, 20 kHz bandwidth |
| S/N at maximum power output (unweighted) |
|
| Power amp |
>75 dB @ 10 Hz to 22 kHz |
| Preamp |
>80 dB @ 10 Hz to 22 kHz |
| Lineout |
>80 dB @ 10 Hz to 22 kHz |
| Crosstalk |
|
| Power amp |
<-75 dB @ 1 kHz, fully loaded |
| Preamp |
<-75 dB @ 1 kHz, fully loaded |
| Lineout |
<-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>80 dB @ 1 kHz |
| CMRR |
>85 dB @ 20 Hz to 200 Hz, >75 dB @ 20 Hz to 20 kHz |
| Bass |
±10 dB @ 100 Hz |
| Treble |
±10 dB @ 10 kHz |
| Loudness (contour) |
+6 dB @ 100 Hz to 10 kHz |
|
| Audio input |
| Number/signal type |
|
| MLS 304 Series |
4 stereo, unbalanced
1 Aux/Mix balanced/unbalanced mono (nonswitchable) |
| MLS 406, Series |
5 stereo, unbalanced (inputs 1-3, 5, 6)
1 stereo, balanced/unbalanced (input 4)
1 Aux/Mix balanced/unbalanced mono (nonswitchable) |
| Connectors |
|
| MLS 304 Series |
2 pairs of female RCA connectors (inputs 1-2)
2 female 3.5 mm mini stereo jacks (unbalanced only) (inputs 3-4);
tip (L), ring (R), sleeve (GND)
(1) 3.5 mm captive screw connector, 3 pole (Aux/Mix input) |
| MLS 406 Series |
3 pairs of female RCA connectors (inputs 1-3)
1 female 3.5 mm captive screw connector, 5 pole (input 4)
2 female 3.5 mm mini stereo jacks (unbalanced only) (inputs 5, 6);
tip (L), ring (R), sleeve (GND)
(1) 3.5 mm captive screw connector, 3-pole (Aux/Mix input) |
| Impedance |
>10k ohms unbalanced, DC coupled |
| Nominal level |
-10 dBV (316 mVrms) |
| Maximum level |
+8 dBV (10.2 dBu, 2.51 Vrms), unbalanced at <0.1%THD+N
+10 dBu (7.28 dBV, 2.45 Vrms), balanced at <0.1% THD+N |
| Input gain adjustment |
-42 dB to +24 dB, adjustable per input |
| NOTE |
|
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu | |
|
| Audio output — Lineout and Preamp |
| Number/signal type |
2 (1 Lineout/fixed and 1 Preamp/variable) stereo/mono, balanced/unbalanced |
| Connectors |
(2) 3.5 mm captive screw connectors, 5 pole |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
±0.8 dB channel to channel |
| Nominal level |
Configurable: -10 dBV (316 mVrms, default), +4 dBu (1.23 Vrms) |
| Maximum level (600 ohm) |
|
| Power amp (mono or stereo) |
>+17 dBu, balanced <0.5% THD+N |
| Preamp |
>+19 dBu, balanced <0.1% THD+N |
| Lineout |
>+16 dBu, balanced <0.1% THD+N |
| NOTE |
|
Unbalanced wired outputs produce 6 dB of attenuation. Balanced outputs have unity gain/attenuation. | |
|
| Audio output — mono power amp (MLS 304MA, MLS 406MA only) |
| Number/signal type |
(1) mono |
| Connector |
(1) 5-position screw terminal |
| Sensitivity |
-20 dBV (-17.8 dBu; 100 mVrms) (adjustable) for maximum power output |
| Power bandwidth |
|
| Direct (4 ohm) |
20 Hz to 20 kHz, 0.5% THD |
| Direct (8 ohm) |
20 Hz to 20 kHz, 0.15% THD |
| Transformer (70 V) |
50 Hz to 20 kHz, 1% THD |
| Transformer (100 V) |
50 Hz to 20 kHz, 0.5% THD |
| Maximum power output |
|
| Direct (4/8 ohm) |
20 watts max. (continuous) |
| Transformer (70/100 V) |
16 watts max. (continuous), transformer coupled |
| Protection |
Input limiting, thermal, short circuit |
|
| Audio output — stereo power amp (MLS 304SA, MLS 406SA only) |
| Number/signal type |
(1) stereo (default) or dual mono (configured via software) |
| Connector |
(1) 5-position screw terminal |
| Sensitivity |
-20 dBV (-17.8 dBu; 100 mVrms) (adjustable) for maximum power output |
| Power bandwidth |
|
| Direct (4 ohm) |
10 Hz to 20 kHz, 0.5% THD |
| Direct (8 ohm) |
20 Hz to 20 kHz, 0.8% THD |
| Maximum power output |
|
| Direct (4 ohm) |
24 watts max. (continuous), 12 watts (rms) per channel |
| Direct (8 ohm) |
16 watts max. (continuous), 8 watts (rms) per channel |
| Protection |
Input limiting, thermal, short circuit |
|
| Control/remote — switcher |
| Serial control port |
RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles) |
| Baud rate and protocol |
9600, 8-bit, 1 stop bit, no parity |
| Serial control pin configurations |
1 = TX, 2 = RX, 4 = GND |
| Program control |
Extron's configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
| Power |
100 VAC to 240 VAC, 50/60 Hz, 60 watts, internal, autoswitchable |
| Temperature/humidity |
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
Operating +32° to +113°F (0° to +45°C) / 10% to 90%, noncondensing |
| Rack mount |
Yes, with included brackets (#70-077-03) |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.75" H x 17.5" W x 8.5" D (1U high, full rack wide)
4.4 cm H x 44.4 cm W x 21.6 cm D
(Depth excludes connectors and knob. Width excludes rack ears.) |
| Product weight |
|
| MLS 406 |
5.0 lbs (2.3 kg) |
| Amplified models |
6.0 lbs (2.7 kg) |
| |
|
| Shipping weight |
|
| MLS 406 |
10 lbs (5 kg) |
| Amplified models |
11 lbs (5 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| NOTE |
|
All nominal levels are at ±10%. | |
| NOTE |
|
Specifications are subject to change without notice. | |
)
