오즈케이블 ozcable
브랜드샵 신상품 AV정보뉴스 게시판 고객센터
HDMI | AV | PureAV | 음향 | CANARE | TVout | AV | 캡쳐 | 안테나케이블 빨리찾기
현재위치 : Home > AV기기,케이블 > 브랜드케이블 > EXTRON > 신호증폭기

TP R BNC AV (Receiver)
이미지크게보기

TP R BNC AV (Receiver)

Twisted Pair RGB Video, Composite Video, and Audio Receiver

판매자 : outbox
판매가 : 2,304,000원
개편-이벤트
즉시할인가 		: 2,304,000원 지금 구입하시면 이 가격에!
적립금 : + 500 포인트
상품번호 : 5048
관련지식 :
모델명 : TP R BNC AV (Receiver)
제조사 : extron
배송비 : , 단 2만원이상주문시 무료배송
구매수량 :
수량
무이자 : 이달의 신용카드 무이자행사
 
개편 기념으로 전무,후무한 즉시할인 10%~4% + 적립11% 행사
한시적으로 진행합니다. 본 행사는 예고없이 종료될 수 있습니다.
 
고객님의 사이버 머니 잔액

0
판매자 상품번호 상품명 / 이벤트 가 격 제조사 상세보기
HDKOREA 7836 MTP RL 15HD A SEQ 1,060,000원 EXTRON
HDKOREA 5113 P/2 DA1 264,000원 extron
HDKOREA 7840 MTP DA8 1,220,000원 EXTRON

신호증폭기 BEST
MTP RL 15HD A SEQ

1,060,000원
MTP RL 15HD RS

773,000원
P/2 DA1

264,000원
MTP RL 15HD RS SEQ

1,100,000원
The Extron TP R BNC AV RGB video receiver accepts long distance transmissions of analog RGB video with PC audio and NTSC, PAL, and SECAM composite video with stereo audio on any CAT 5, 5e, or 6 twisted pair cable or with Extron Enhanced Skew-Free™ A/V UTP cable (patent pending).

The computer-video receiver of the TP R BNC AV handles signals with a 15-130 kHz horizontal scan rate, a 30-150 Hz vertical scan rate, and it is compatible with nearly every computer and video signal type, including VGA-UXGA, Mac, Sun®, SGI, component, S-video, and composite. The composite video receiver handles NTSC, PAL, and SECAM video, as well as stereo audio signals. Special image enhancement features, such as automatic and manual level and peaking adjustments, give the TP R BNC AV the ability to compensate for cable length and to improve the brightness and sharpness of both the RGB video image and the composite video image. Separate H and V sync, composite sync, and sync-on-green outputs of the RGB video are DIP switch selectable. (Sync is passed through from the transmitter, not stripped by the receiver.)

When using data grade twisted pair cable for sending high-resolution video signals long distances, a problem called skew can cause a distortion in the image, resulting in visible color separation. Extron offers two options for solving this problem and restoring image quality. The first option is to place an SEQ 100 BNC Skew Equalizer at the receiving end of any cable run where skew is a problem. The second option is to use Extron's Skew-Free™ A/V UTP cable to make system connections.

Optional mount kits allow the TP R BNC AV to be mounted on a rack, under, or through a desk surface. The through-desk mount keeps the power/signal LED visible while keeping the power and input/output connections out of sight.
  • Inputs on shielded RJ-45 connectors
  • Automatic and manual level and peaking adjustments
  • Sync-on-green output (DIP switch selectable)
  • Two discreet video and RGB stereo audio outputs (balanced/unbalanced)
  • Internal international power supply
  • Rack, through-desk, under-desk, and projector-mountable
  • Rugged metal enclosure

    • Video
      Number/signal type   1 or 2 sets of proprietary analog signals
      Connectors   1 or 2 shielded RJ-45 female
    Video input ― refer to the TP Transmitters Family User's Manual, part #68‑546‑02
    Video output
      Number/signal type  
            TP R BNC A   1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
    1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
    3 NTSC/PAL composite video from a single source
            TP R BNC AV   1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
    1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
    3 NTSC/PAL/SECAM composite video from a single source
    and 1 NTSC/PAL/SECAM composite video
            TP R 15HD A   1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
    1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
    3 NTSC/PAL composite video from a single source
            TP R AV   1 NTSC/PAL/SECAM composite video
      Connectors  
            TP R BNC A   5 BNC female
            TP R BNC AV   6 BNC female
            TP R 15HD A   (1) 15-pin HD female
            TP R AV   1 BNC female
      Nominal level   1 Vp-p for Y of component video and S-video, and for composite video
    0.7 Vp-p for RGB
    0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
      Minimum/maximum levels   0.3 V to 1.45 Vp-p
      Impedance   75 ohms
    Audio
      Number/signal type   1 or 2 sets of analog proprietary signals
      Connectors   1 or 2 shielded RJ-45 female
      Frequency response   20 Hz to 20 kHz, >÷0.05 dB
      THD + Noise   0.03% @ 1 kHz, 0.3% @ 20 kHz at maximum output (unweighted)
      S/N   >63 dB at nominal level
      Crosstalk   <-80 dB @ 1 kHz, fully loaded
      Stereo channel separation   >80 dB @ 1 kHz
      CMRR   >33 dB @ 20 Hz to 20 kHz
    Audio input ― refer to the TP Transmitters Family User's Manual, part #68‑546‑02
       NOTE    0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≒ 2 dBu
    Audio output
      Number/signal type  
            TP R BNC A,  
            TP R AV   1 stereo audio balanced/unbalanced, and 1 stereo audio unbalanced
            TP R 15HD A   1 stereo audio balanced/unbalanced
            TP R BNC AV   2 stereo audio balanced/unbalanced, and 2 stereo audio unbalanced
      Connectors  
            TP R 15HD A   (1) 3.5 mm, 5-pole captive screw connector per input
            All other models   2 female RCA (left/right) per input
    (1) 3.5 mm, 5-pole captive screw connector per input
      Impedance   50 ohms unbalanced, 100 ohms balanced
      Gain error   ÷0.1 dB channel to channel
      Maximum level (600 ohm)   >+11.5 dBm, balanced at 1%THD+N
    General
      Power (TP R BNC AV)   100 VAC to 240 VAC, 50/60 Hz, 40 watts, internal, autoswitchable
      External power supply (all models except TP R BNC AV)  
    100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 15 VDC, 0.8 A, regulated
      Power input requirements  
            TP R BNC A, TP R AV   15 VDC, 0.3 A (minimum)
            TP R 15HD A   15 VDC, 0.34 A (maximum)
         
      Temperature/humidity   Storage -40▲ to +158▲F (-40▲ to +70▲C) / 10% to 90%, noncondensing
    Operating +32▲ to +122▲F (0▲ to +50▲C) / 10% to 90%, noncondensing
      Rack mount  
            TP R AV   No, but projector mountable with optional mounting kit (#70-077-04), furniture mountable with optional mounting brackets (#70-077-01 and #70-077-02).
            TP R 15HD A   Yes, with optional VersaTools 1U rack shelf, part #60-190-20 or optional standard 1U rack shelf, part #60-190-01. Also, projector mountable with optional mounting kit, part #70-217-01 or under-furniture mountable with optional mounting brackets, part #70-212-01.
            TP R BNC A, TP R BNC AV  
    Yes, with optional 1U rack shelf, part #60-190-01. Also, projector mountable with optional mounting kit, part #70-077-04 or furniture mountable with optional mounting brackets #70-077-01, 70-077-02.
      Enclosure type   Metal
      Enclosure dimensions  
            TP R BNC A   1.3" H x 8.75" W x 7.0" D (<1U high, half rack wide)
    3.3 cm H x 22.2 cm W x 17.8 cm D
    (Depth excludes connectors.)
            TP R BNC AV   1.7" H x 8.75" W x 7.0" D (1U high, half rack wide)
    4.3 cm H x 22.2 cm W x 17.8 cm D
    (Depth excludes connectors.)
            TP R 15HD A   1.6" H x 4.25" W x 3.0" D (1U high, quarter rack wide)
    4.1 cm H x 10.8 cm W x 7.6 cm D
    (Depth excludes connectors.)
            TP R AV   1.25" H x 4.75" W x 7.0" D
    3.2 cm H x 12.1 cm W x 17.8 cm D
    (Depth excludes connectors.)
      Product weight  
            TP R BNC A   1.6 lbs (0.7 kg)
            TP R BNC AV   2.6 lbs (1.2 kg)
            TP R 15HD A   0.4 lbs (0.2 kg)
            TP R AV   0.9 lbs (0.4 kg)
      Shipping weight  
            TP R BNC A   4 lbs (2 kg)
            TP R BNC AV   5 lbs (3 kg)
            TP R 15HD A   2 lbs (1 kg)
            TP R AV   3 lbs (2 kg)
      Vibration   ISTA 1A in carton (International Safe Transit Association)
      Listings   UL, CUL
      Compliances   CE, FCC Class A
      MTBF   30,000 hours