|
 |
 |
|
 |
The Extron TP R BNC A RGB receiver accepts long distance transmissions of analog RGB video with PC audio on any CAT 5, 5e, or 6 twisted pair cable or Extron Enhanced Skew-Free™ A/V UTP cable (patent pending).
The TP R BNC A accepts signals with a 15-130 kHz horizontal scan rate and a 30-150 Hz vertical scan rate. It is compatible with nearly every computer and video signal type, including VGA-UXGA, Mac, Sun®, SGI, composite, component, and S-video. Special image enhancement features, such as automatic and manual level and peaking adjustments, give the TP R BNC A the ability to improve the brightness and sharpness of the RGB video image. Separate H and V sync, composite sync, and sync-on-green outputs of the RGB video are DIP switch selectable. (Sync-on-green is passed through from the transmitter, and not stripped by the receiver.)
When using data grade twisted pair cable for sending high-resolution video signals long distances, a problem called skew can cause a distortion in the image, resulting in visible color separation. Extron offers two options for solving this problem and restoring image quality. The first option is to place an SEQ 100 BNC Skew Equalizer at the receiving end of any cable run where skew is a problem. The second option is to use Extron's Enhanced Skew-Free™ A/V UTP cable to make system connections.
Optional mount kits allow the TP R BNC A receiver to be mounted on a rack shelf, under or through a desk surface, or near a projector. The through-desk mount keeps all controls accessible while keeping the power and input/output connections out of sight.
- Input on a shielded RJ-45 connector
- Automatic and manual level and peaking adjustments
- Sync-on-green output (DIP switch selectable)
- Two stereo audio outputs (balanced/unbalanced)
- Rack, through-desk, under-desk, and projector-mountable
- Rugged metal enclosure
- External international power supply included (part number 70-057-01)
| Video |
| Number/signal type |
1 or 2 sets of proprietary analog signals |
| Connectors |
1 or 2 shielded RJ-45 female |
|
| Video input ― refer to the TP Transmitters Family User's Manual, part #68‑546‑02 |
|
| Video output |
| Number/signal type |
|
| TP R BNC A |
1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source |
| TP R BNC AV |
1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source
and 1 NTSC/PAL/SECAM composite video |
| TP R 15HD A |
1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source |
| TP R AV |
1 NTSC/PAL/SECAM composite video |
| Connectors |
|
| TP R BNC A |
5 BNC female |
| TP R BNC AV |
6 BNC female |
| TP R 15HD A |
(1) 15-pin HD female |
| TP R AV |
1 BNC female |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video |
| Minimum/maximum levels |
0.3 V to 1.45 Vp-p |
| Impedance |
75 ohms |
|
| Audio |
| Number/signal type |
1 or 2 sets of analog proprietary signals |
| Connectors |
1 or 2 shielded RJ-45 female |
| Frequency response |
20 Hz to 20 kHz, >÷0.05 dB |
| THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at maximum output (unweighted) |
| S/N |
>63 dB at nominal level |
| Crosstalk |
<-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>80 dB @ 1 kHz |
| CMRR |
>33 dB @ 20 Hz to 20 kHz |
|
| Audio input ― refer to the TP Transmitters Family User's Manual, part #68‑546‑02 |
| NOTE |
|
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≒ 2 dBu | |
|
| Audio output |
| Number/signal type |
|
| TP R BNC A, |
|
| TP R AV |
1 stereo audio balanced/unbalanced, and 1 stereo audio unbalanced |
| TP R 15HD A |
1 stereo audio balanced/unbalanced |
| TP R BNC AV |
2 stereo audio balanced/unbalanced, and 2 stereo audio unbalanced |
| Connectors |
|
| TP R 15HD A |
(1) 3.5 mm, 5-pole captive screw connector per input |
| All other models |
2 female RCA (left/right) per input
(1) 3.5 mm, 5-pole captive screw connector per input |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
÷0.1 dB channel to channel |
| Maximum level (600 ohm) |
>+11.5 dBm, balanced at 1%THD+N |
|
| General |
| Power (TP R BNC AV) |
100 VAC to 240 VAC, 50/60 Hz, 40 watts, internal, autoswitchable |
| External power supply (all models except TP R BNC AV) |
100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 15 VDC, 0.8 A, regulated |
| Power input requirements |
|
| TP R BNC A, TP R AV |
15 VDC, 0.3 A (minimum) |
| TP R 15HD A |
15 VDC, 0.34 A (maximum) |
|
|
| Temperature/humidity |
Storage -40▲ to +158▲F (-40▲ to +70▲C) / 10% to 90%, noncondensing
Operating +32▲ to +122▲F (0▲ to +50▲C) / 10% to 90%, noncondensing |
| Rack mount |
|
| TP R AV |
No, but projector mountable with optional mounting kit (#70-077-04), furniture mountable with optional mounting brackets (#70-077-01 and #70-077-02). |
| TP R 15HD A |
Yes, with optional VersaTools 1U rack shelf, part #60-190-20 or optional standard 1U rack shelf, part #60-190-01. Also, projector mountable with optional mounting kit, part #70-217-01 or under-furniture mountable with optional mounting brackets, part #70-212-01. |
| TP R BNC A, TP R BNC AV |
Yes, with optional 1U rack shelf, part #60-190-01. Also, projector mountable with optional mounting kit, part #70-077-04 or furniture mountable with optional mounting brackets #70-077-01, 70-077-02. |
| Enclosure type |
Metal |
| Enclosure dimensions |
|
| TP R BNC A |
1.3" H x 8.75" W x 7.0" D (<1U high, half rack wide)
3.3 cm H x 22.2 cm W x 17.8 cm D
(Depth excludes connectors.) |
| TP R BNC AV |
1.7" H x 8.75" W x 7.0" D (1U high, half rack wide)
4.3 cm H x 22.2 cm W x 17.8 cm D
(Depth excludes connectors.) |
| TP R 15HD A |
1.6" H x 4.25" W x 3.0" D (1U high, quarter rack wide)
4.1 cm H x 10.8 cm W x 7.6 cm D
(Depth excludes connectors.) |
| TP R AV |
1.25" H x 4.75" W x 7.0" D
3.2 cm H x 12.1 cm W x 17.8 cm D
(Depth excludes connectors.) |
| Product weight |
|
| TP R BNC A |
1.6 lbs (0.7 kg) |
| TP R BNC AV |
2.6 lbs (1.2 kg) |
| TP R 15HD A |
0.4 lbs (0.2 kg) |
| TP R AV |
0.9 lbs (0.4 kg) |
| Shipping weight |
|
| TP R BNC A |
4 lbs (2 kg) |
| TP R BNC AV |
5 lbs (3 kg) |
| TP R 15HD A |
2 lbs (1 kg) |
| TP R AV |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A |
| MTBF |
30,000 hours |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
