|
 |
 |
|
 |
The Extron TP T BNC video transmitter sends analog RGB video signals up to 1,000 feet (300 meters) over any CAT 5, 5e, or 6 twisted pair cable or with Extron Enhanced Skew-Free™ A/V UTP cable (patent pending). The TP T BNC inputs RGB video on five female BNC connectors and transmits the video on a shielded female RJ-45 connector.
The TP T BNC accepts signals with a 15-130 kHz horizontal scan rate and a 30-150 Hz vertical scan rate. It is compatible with nearly every computer and video signal type, including VGA-UXGA, Mac, Sun®, SGI, component, S-video, and composite.
When using data grade twisted pair cable for sending high-resolution video signals long distances, a problem called skew can cause a distortion in the image, resulting in visible color separation. Extron offers two options for solving this problem and restoring image quality. The first option is to place an SEQ 100 BNC Skew Equalizer at the receiving end of any cable run where skew is a problem. The second option is to use Extron's Enhanced Skew-Free™ A/V UTP cable to make system connections.
Optional mount kits allow the TP T BNC video transmitter to be mounted on a rack shelf, under, or through a desk surface. The through-desk mount keeps the power/signal LED visible while keeping the power and input/output connections out of sight.
Output on a shielded RJ-45 connector
External international power supply included (part number 70-057-01)
Rack, through-desk, or under-desk mountable
Rugged metal enclosure
| TP Series Transmitters |
|
| Video ― video models |
| Number/signal type |
1, 2, or 4 sets of proprietary analog signals |
| Connectors |
|
| TP T 15HD 45 |
(1) 8-pin spring force captive wire connector |
| All other models |
1, 2, or 4 shielded RJ-45 female |
|
| Video input ― video models |
| Number/signal type |
|
| TP T 460, TP T 15HD A, TP T 15HD 45 |
1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source |
| TP T 15HD AV |
1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source
and 1 NTSC/PAL/SECAM composite video |
| TP T BNC, TP T BNC DA4 |
1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source |
| TP T AV |
1 NTSC/PAL/SECAM composite video |
| Connectors |
|
| TP T 15HD A, TP T 460, TP T 15HD 45 |
(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available) |
| TP T 15HD AV |
(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available),
1 RCA female |
| TP T BNC, TP T BNC DA4 |
5 BNC female |
| TP T AV |
1 RCA female |
| Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video |
| Minimum/maximum levels |
0.3 V to 1.45 Vp-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 130 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
100 mV |
|
| Video output ― refer to the TP Receivers Family User's Manual, part #68-547-02 |
|
| Audio ― audio models |
| Number/signal type |
1 or 2 sets of analog proprietary signals |
| Connectors |
|
| TP T A 45 |
(1) 2-pin direct insertion captive screw connector |
| All other models |
1 or 2 shielded RJ-45 female |
| Frequency response |
20 Hz to 20 kHz, >÷0.05 dB |
| THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N |
>63 dB at maximum output (unweighted) |
| Crosstalk |
<-80 dB @ 1 kHz, fully loaded |
| Stereo channel separation |
>80 dB @ 1 kHz |
| CMRR |
>33 dB @ 20 Hz to 20 kHz |
|
| Audio input ― audio models |
| Number/signal type |
|
| TP T 15HD A, TP T AV, TP T 460, TP T A 45 |
1 stereo, unbalanced |
| TP T 15HD AV |
2 stereo, unbalanced |
| Connectors |
|
| TP T 15HD A, TP T 460, TP T A 45 |
(1) 3.5 mm mini jack |
| TP T 15HD AV |
(1) 3.5 mm mini jack, 2 female RCA |
| TP T AV |
2 female RCA |
| Impedance |
|
| TP T A 45 |
>10k ohms, unbalanced, DC coupled |
| All other models |
5k ohms, unbalanced, DC coupled |
| Nominal level |
-10 dBV (316 mV) |
| Maximum level |
+5.5 dBu, (unbalanced) at 1%THD+N |
| CMRR |
>75 dB @ 20 Hz to 20 kHz |
| NOTE |
|
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≒ 2 dBu. | |
|
| Audio output ― refer to the TP Receivers Family User's Manual, part #68-547-02 |
|
| General |
| Power |
|
| TP T 15HD A, TP T 15HD AV, TP TBNC, TP T 460 |
15 VDC, 0.8 A, external or provided by the TP R receiver for up to 300' distance |
| TP T AV |
15 VDC, 0.8 A, external or provided by the TP R receiver for up to 800' distance |
| TP T BNC DA4 |
15 VDC, 0.8 A, external |
| TP T 15HD 45 |
12 VDC, 1.0 A, external |
| TP T A 45 |
Shared with the TP T 15HD 45 transmitter |
| NOTE |
|
The TP R 15HD A receiver will not provide power to any twisted pair transmitter. | |
| Temperature/humidity |
Storage -40 to +158 ▲F (-40 to +70 ▲C) / 10% to 90%, noncondensing
Operating +32 to +122 ▲F (0 to +50 ▲C) / 10% to 90%, noncondensing |
| Rack mount |
|
| TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4 |
Yes, with optional 1U rack shelf, part #60-190-01 or #60-604-01, and rack shelf mounting kit #70-123-01. Furniture mountable with optional mounting brackets #70-077-01 or #70-077-02. |
| TP T AV |
No, but furniture mountable with optional mounting brackets #70-077-01, 70-077-02 |
| TP T 460 |
No, but wall or furniture mountable. |
| TP T 15HD 45, TP T A 45 |
No, but mountable in a 45 mm x 45 mm opening |
| Enclosure type |
Metal |
| Enclosure dimensions |
|
| TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4 |
1.3" H x 6.8" W x 4.5" D (<1U high, (3.3 cm H x 17.3 cm W x 11.4 cm D)
(Depth excludes connectors.) |
| TP T AV |
1.3" H x 4.8" W x 4.5" D (3.3 cm H x 12.2 cm W x 11.4 cm D)
(Depth excludes connectors.) |
| TP T 460 |
|
| Plate |
4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang) |
| Interface enclosure |
2.6" H x 3.1" W x 1.1" D (6.6 cm H x 7.9 cm W x 2.8 cm D)
(Depth excludes front panel connectors and controls.) |
| TP T 460 EC |
|
| Faceplate |
3.25" H x 3.9" W x 0.1" D (8.3 cm H x 10.0 cm W x 0.3 cm D) |
| Interface enclosure |
2.5" H x 3.7" W x 1.75" D (6.4 cm H x 9.4 cm W x 4.5 cm D)
(Depth excludes connectors and knobs.) |
| TP T 15HD 45, TP T A 45 |
|
| Faceplate |
1.8" H x 1.8" W x 0.8" D (45 mm H x 45 mm W x 20 mm D) |
| Device |
1.1" H x 1.6" W x 1.2" D (29 mm H x 41 mm W x 30 mm D)
(Depth excludes connectors.) |
| Product weight |
|
| TP T 15HD A, TP T 15HD AV |
0.8 lbs (0.4 kg) |
| TP T BNC, TP T BNC DA4 |
0.9 lbs (0.4 kg) |
| TP T AV |
0.5 lbs (0.3 kg) |
| TP T 460, TP T 460 EC |
0.5 lbs (0.3 kg) |
| TP T 15HD 45, TP T A 45 |
0.3 lbs (0.1 kg) |
| Shipping weight |
|
| TP T AV |
2 lbs (1 kg) |
| All other models |
3 lbs (2 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings (all models except TP T 15HD 45 and TP T A 45) |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
