오즈케이블 ozcable
브랜드샵 신상품 AV정보뉴스 게시판 고객센터
HDMI | AV | PureAV | 음향 | CANARE | TVout | AV | 캡쳐 | 안테나케이블 빨리찾기
현재위치 : Home > AV기기,케이블 > 브랜드케이블 > EXTRON > 신호증폭기

TP T 460 (Transmitter)
이미지크게보기

TP T 460 (Transmitter)

Architectural Twisted Pair Computer-Video and Audio Transmitter for Two-Gang Wall Box

판매자 : outbox
판매가 : 1,320,000원
개편-이벤트
즉시할인가 		: 1,320,000원 지금 구입하시면 이 가격에!
적립금 : + 500 포인트
상품번호 : 5041
관련지식 :
모델명 : TP T 460 (Transmitter)
제조사 : extron
배송비 : , 단 2만원이상주문시 무료배송
구매수량 :
수량
무이자 : 이달의 신용카드 무이자행사
 
개편 기념으로 전무,후무한 즉시할인 10%~4% + 적립11% 행사
한시적으로 진행합니다. 본 행사는 예고없이 종료될 수 있습니다.
 
고객님의 사이버 머니 잔액

0
판매자 상품번호 상품명 / 이벤트 가 격 제조사 상세보기
HDKOREA 5045 TP R 15HD A (Receiver) 816,000원 extron
HDKOREA 4986 MTP R 15HD A 564,000원 extron
HDKOREA 4998 TP T AV 1,044,000원 extron

신호증폭기 BEST
MTP RL 15HD A SEQ

1,060,000원
MTP RL 15HD RS

773,000원
P/2 DA1

264,000원
MTP RL 15HD RS SEQ

1,100,000원
The Extron TP T 460 computer-video and audio transmitter accepts analog computer-video on 15-pin HD connectors and PC audio signals on 3.5 mm mini jacks. Each model is able to transmit signals up to 1,000 feet (300 meters) over any CAT 5, 5e, or 6 twisted pair cable or with Extron Enhanced Skew-Free?A/V UTP cable (patent pending). The standard TP T 460 models fit snugly into a two-gang wall box while the TP T 46 EC models mount in European Cable Channel.

The TP T 460 transmitter accepts signals with a 15-130 kHz horizontal scan rate and a 30-150 Hz vertical scan rate. It is compatible with nearly every computer and signal type, including VGA-UXGA, Mac, Sun? and SGI. Both of the TP T 460 features ID bit termination on pins 4 and 11 of its 15-pin HD inputs, ensuring that computers requiring local monitors will operate correctly if no monitor is installed. Output connection is on female RJ-45 connectors.

When using data grade twisted pair cable for sending high-resolution video signals long distances, a problem called skew can cause a distortion in the image, resulting in visible color separation. Extron offers two options for solving this problem and restoring image quality. The first option is to place an SEQ 100 15HD Skew Equalizer at the receiving end of any cable run where skew is a problem. The second option is to use Extron's Enhanced Skew-Free?A/V UTP cable to make system connections.

The design of the TP T 460 combines shallow depth with wall mounting for easy installation. Horizontal shift capability allows for centering the displayed image.
  • Input: Female 15-pin HD input connector
  • Output: Female RJ-45 connector
  • Buffered local monitor output
  • Horizontal shift control
  • External international power supply included (part number 70-057-01)
  • Two-gang wall box mountable
  • Wall mounting mud ring included
  • Rugged metal enclosure

TP Series Transmitters
Video ― video models
Number/signal type 1, 2, or 4 sets of proprietary analog signals
Connectors
TP T 15HD 45 (1) 8-pin spring force captive wire connector
All other models 1, 2, or 4 shielded RJ-45 female
Video input ― video models
Number/signal type
TP T 460, TP T 15HD A, TP T 15HD 45
1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL composite video from a single source
TP T 15HD AV 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source
and 1 NTSC/PAL/SECAM composite video
TP T BNC, TP T BNC DA4 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source; or
3 NTSC/PAL/SECAM composite video from a single source
TP T AV 1 NTSC/PAL/SECAM composite video
Connectors
TP T 15HD A, TP T 460, TP T 15HD 45
(1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available)
TP T 15HD AV (1) 15-pin HD female (Mac and Sun/SGI to VGA adapters are available),
1 RCA female
TP T BNC, TP T BNC DA4 5 BNC female
TP T AV 1 RCA female
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels 0.3 V to 1.45 Vp-p with no offset at unity gain
Impedance 75 ohms
Horizontal frequency 15 kHz to 130 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max. allowable) 100 mV
Video output ― refer to the TP Receivers Family User's Manual, part #68-547-02
Audio ― audio models
Number/signal type 1 or 2 sets of analog proprietary signals
Connectors
TP T A 45 (1) 2-pin direct insertion captive screw connector
All other models 1 or 2 shielded RJ-45 female
Frequency response 20 Hz to 20 kHz, >÷0.05 dB
THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N >63 dB at maximum output (unweighted)
Crosstalk <-80 dB @ 1 kHz, fully loaded
Stereo channel separation >80 dB @ 1 kHz
CMRR >33 dB @ 20 Hz to 20 kHz
Audio input ― audio models
Number/signal type
TP T 15HD A, TP T AV, TP T 460, TP T A 45
1 stereo, unbalanced
TP T 15HD AV 2 stereo, unbalanced
Connectors
TP T 15HD A, TP T 460, TP T A 45
(1) 3.5 mm mini jack
TP T 15HD AV (1) 3.5 mm mini jack, 2 female RCA
TP T AV 2 female RCA
Impedance
TP T A 45 >10k ohms, unbalanced, DC coupled
All other models 5k ohms, unbalanced, DC coupled
Nominal level -10 dBV (316 mV)
Maximum level +5.5 dBu, (unbalanced) at 1%THD+N
CMRR >75 dB @ 20 Hz to 20 kHz
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≒ 2 dBu.
Audio output ― refer to the TP Receivers Family User's Manual, part #68-547-02
General
Power
TP T 15HD A, TP T 15HD AV, TP TBNC, TP T 460
15 VDC, 0.8 A, external or provided by the TP R receiver for up to 300' distance
TP T AV 15 VDC, 0.8 A, external or provided by the TP R receiver for up to 800' distance
TP T BNC DA4 15 VDC, 0.8 A, external
TP T 15HD 45 12 VDC, 1.0 A, external
TP T A 45 Shared with the TP T 15HD 45 transmitter
NOTE The TP R 15HD A receiver will not provide power to any twisted pair transmitter.
Temperature/humidity Storage -40 to +158 ▲F (-40 to +70 ▲C) / 10% to 90%, noncondensing
Operating +32 to +122 ▲F (0 to +50 ▲C) / 10% to 90%, noncondensing
Rack mount
TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4
Yes, with optional 1U rack shelf, part #60-190-01 or #60-604-01, and rack shelf mounting kit #70-123-01. Furniture mountable with optional mounting brackets #70-077-01 or #70-077-02.
TP T AV No, but furniture mountable with optional mounting brackets #70-077-01, 70-077-02
TP T 460 No, but wall or furniture mountable.
TP T 15HD 45, TP T A 45 No, but mountable in a 45 mm x 45 mm opening
Enclosure type Metal
Enclosure dimensions
TP T 15HD A, TP T 15HD AV, TP T BNC, TP T BNC DA4
1.3" H x 6.8" W x 4.5" D (<1U high, (3.3 cm H x 17.3 cm W x 11.4 cm D)
(Depth excludes connectors.)
TP T AV 1.3" H x 4.8" W x 4.5" D (3.3 cm H x 12.2 cm W x 11.4 cm D)
(Depth excludes connectors.)
TP T 460
Plate 4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang)
Interface enclosure 2.6" H x 3.1" W x 1.1" D (6.6 cm H x 7.9 cm W x 2.8 cm D)
(Depth excludes front panel connectors and controls.)
TP T 460 EC
Faceplate 3.25" H x 3.9" W x 0.1" D (8.3 cm H x 10.0 cm W x 0.3 cm D)
Interface enclosure 2.5" H x 3.7" W x 1.75" D (6.4 cm H x 9.4 cm W x 4.5 cm D)
(Depth excludes connectors and knobs.)
TP T 15HD 45, TP T A 45
Faceplate 1.8" H x 1.8" W x 0.8" D (45 mm H x 45 mm W x 20 mm D)
Device 1.1" H x 1.6" W x 1.2" D (29 mm H x 41 mm W x 30 mm D)
(Depth excludes connectors.)
Product weight
TP T 15HD A, TP T 15HD AV 0.8 lbs (0.4 kg)
TP T BNC, TP T BNC DA4 0.9 lbs (0.4 kg)
TP T AV 0.5 lbs (0.3 kg)
TP T 460, TP T 460 EC 0.5 lbs (0.3 kg)
TP T 15HD 45, TP T A 45 0.3 lbs (0.1 kg)
Shipping weight
TP T AV 2 lbs (1 kg)
All other models 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Listings (all models except TP T 15HD 45 and TP T A 45)
UL, CUL
Compliances CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF 30,000 hours