|
 |
 |
|
 |
● Description
The Extron MAV 44 AV, MAV 48 AV, MAV 84 AV, and MAV 88 AV matrix switchers are designed to route composite video and stereo audio (balanced/unbalanced) signals. They are available in compact 4x4, 4x8, 8x4, and 8x8 models, ideal for a wide range of matrix switching applications. Corporate boardrooms, command and control centers, museums, university classrooms, sports bars, videoconferencing rooms, and home theaters are all environments where a MAV matrix switcher is effective.
● Features
- 150 MHz (-3dB) video bandwidth, fully loaded – Ensures flawless switching and distribution of signals without signal degradation. The 150 MHz (-3dB) is a worst case specification, i.e., a MAV matrix switcher provides 150 MHz (-3dB) at full performance capacity when one input signal drives all outputs.
- Video genlock and vertical interval switching – Broadcast quality NTSC, PAL, or SECAM video genlock capabilities allow for vertical interval switching. This enables smooth, seamless transitions when switching between inputs.
- Quad standard – MAV matrix switchers are capable of switching NTSC 3.58, NTSC 4.43, PAL, and SECAM video (quad standard) for worldwide compatibility.
- Balanced and unbalanced audio – Accepts both balanced and unbalanced stereo audio signals on captive screw connectors (audio-only versions). The composite video and RCA audio switchers only accept unbalanced stereo audio signals on RCA connectors.
- Audio input gain and attenuation – Balances all audio inputs so there is no noticeable difference between volume levels. Adjustments can be made directly from the front panel or through RS-232 control, input by input.
- Audio breakaway – Provides the capability to break away an audio signal from its corresponding video signal. Audio breakaway switching can be done via the front panel or RS-232 remote.
- QuickSwitch Front Panel Controller (QS-FPC™) – Allows for touch-of-a-button input and output selection.
- View I/O mode – Available via the front panel and RS-232 control, users can easily view which individual inputs and outputs are actively connected.
- Global presets – These store commonly used switching configurations. Any preset may be recalled from the front panel or RS-232 control. When a preset is recalled, all the new I/O connections occur simultaneously. This is also called a salvo.
- RS-232 control – A rear panel, RS-232 control port provides connection of the MAV matrix switchers to a third party control system. The Extron Simple Instruction Set (SIS™) allows for quick and easy programming.
- Simple Instruction Set (SIS) – Extron's SIS is a set of basic ASCII code commands that provide simple control through a third party control system. Instead of programming in long, obscure strings of code, the SIS makes it easy to operate an Extron product using RS-232 control.
- Optional IR Control – Switcher operation is controlled via the optional IR 501 remote control or the front panel.
- Control software – For RS-232 remote control from a PC, Extron ships our Windows®-based control software with every matrix switcher. This icon-driven software uses a graphical, drag-and-drop interface to make I/O configuration and other customization functions simple and convenient. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may then be saved for future downloading to the matrix switcher.
- MCP 1000 and MKP 1000 control – Utilizing the MCP 1000 Master Control Panel and any combination of MCP 1000 slave control panels or MKP 1000 control keypads offers the flexibility to control a MAV matrix switcher from a remote location. Each MCP 1000 panel may be used for one-button switching for a particular output and selecting global presets. Each MKP 1000 keypad may be used to select a different input or preset.
- Front panel security lockout – If a MAV matrix switcher is installed in an unsecured environment where easy access is undesirable, a security lock-out feature may be implemented. During lock-out mode, a special button combination is required to operate the front panel controller.
- Internal international power supply – The autoswitchable, internal power supply provides worldwide power compatibility.
● Specifications
| Video — composite video and S-video models |
| Routing |
|
| MAV 44 Series |
4 x 4 matrix |
| MAV 48 Series |
4 x 8 matrix |
| MAV 62 Series |
6 x 2 matrix |
| MAV 84 Series |
8 x 4 matrix |
| MAV 88 Series |
8 x 8 matrix |
| Gain |
Unity |
| Bandwidth |
150 MHz (-3 dB), fully loaded |
| Differential phase error |
<0.1º at 3.58 MHz and 4.43 MHz |
| Differential gain error |
<0.1% at 3.58 MHz and 4.43 MHz |
| Crosstalk |
<-50 dB @ 5 MHz |
| Switching speed |
20 ms (max.) |
|
| Video input — composite video and S-video models |
| Number/signal type |
|
| MAV 44 AV, MAV 44 AV RCA, MAV 44 V, MAV 48 AV, MAV 48 AV RCA, MAV 48 V |
4 composite video |
| MAV 44 SVA, MAV 44 SVA RCA, MAV 44 SV, MAV 48 SVA, MAV 48 SVA RCA, MAV 48 SV |
4 S-video |
| MAV 62 Composite Video |
6 composite video |
| MAV 62 S-video |
6 S-video |
| MAV 84 AV, MAV 84 AV RCA, MAV 88 AV, MAV 88 AV RCA, MAV 88 V |
8 composite video |
| MAV 84 SVA, MAV 84 SVA RCA, MAV 88 SVA, MAV 88 SVA RCA, MAV 88 SV |
8 S-video |
| Connectors |
|
| MAV 44/48 composite video models |
4 female BNC |
| MAV 44/48 S-video models |
4 female 4-pin mini DIN |
| MAV 62 Composite Video |
6 BNC female |
| MAV 62 S-video |
6 female 4-pin mini DIN |
| MAV 84/88 composite video models |
8 female BNC |
| MAV 84/88 S-video models |
8 female 4-pin mini DIN |
| Nominal level |
1 Vp-p for Y of S-video, and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.4 V to 2.0 Vp-p with no offset at unity gain |
| Impedance |
75 ohms |
| Return loss |
|
| MAV 62 Series |
<-30dB @ 5 MHz |
| All other models |
Composite video: <-40 dB @ 0 to 10 MHz
S-video: <-25 dB @ 0 to 10 MHz |
| DC offset (max. allowable) |
|
| MAV 62 Series |
1.5 V |
| All other models |
5 V |
| External sync (genlock) |
0.2 V to 0.4 Vp-p |
| Input coupling |
AC coupling only (for models other than the MAV 62 Series) |
|
| Video output — composite video and S-video models |
| MAV 44 AV, MAV 44 AV RCA, MAV 44 V, MAV 84 AV, MAV 84 AV RCA |
4 composite video |
| MAV 44 SVA, MAV 44 SVA RCA, MAV 44 SV, MAV 84 SVA, MAV 84 SVA RCA |
4 S-video |
| MAV 62 Composite Video |
2 composite video |
| MAV 62 S-video |
2 S-video |
| MAV 88 AV, MAV 88 AV RCA, MAV 88 V, MAV 48 AV, MAV 48 AV RCA, MAV 48 V |
8 composite video |
| MAV 88 SVA, MAV 88 SVA RCA, MAV 88 SV, MAV 48 SVA, MAV 48 SVA RCA, MAV 48 SV |
8 S-video |
| Connectors |
|
| MAV 62 Composite Video |
2 female BNC |
| MAV 62 S-video |
2 female 4-pin mini DIN |
| MAV 44/84 composite video models |
4 female BNC |
| MAV 44/84 S-video models |
4 female 4-pin mini DIN |
| MAV 48/88 composite video models |
8 female BNC |
| MAV 48/88 S-video models |
8 female 4-pin mini DIN |
| Nominal level |
1 Vp-p for Y of S-video, and for composite video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.4 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
|
| MAV 62 Series |
<-30 dB @ 5 MHz |
| All other models |
S-video: <-25 dB @ 5 MHz
Composite video: <-40 dB @ 5 MHz |
| DC offset |
|
| MAV 62 Series |
±5 mV maximum with input at 0 offset |
| All other models |
15 mV typical (per output enabled with 70 ohm termination) with input at 0 offset |
| Switching type |
Vertical interval |
|
| Sync — composite video and S-video models |
| Genlock connectors |
2 BNC female |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
|
| Audio — audio models |
| Routing |
|
| MAV 44 Series |
4 x 4 stereo matrix |
| MAV 48 Series |
4 x 8 stereo matrix |
| MAV 62 Series |
6 x 2 stereo matrix |
| MAV 84 Series |
8 x 4 stereo matrix |
| MAV 88 Series |
8 x 8 stereo matrix |
| Gain |
Adjustable; the default is unity. Unity gain occurs for all RCA connector models and in MAV 62 Series models configured for unbalanced output. In all other models with captive screw connectors, unity gain occurs when the switcher is configured for balanced output. |
| Frequency response |
20 Hz to 20 kHz, ±0.5 dB |
| THD + Noise |
0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N |
>90 dB at maximum output (unweighted) |
| Crosstalk |
<-65 dB @ 20 kHz, <-80 dB @ 1 kHz or below 60 Hz, fully loaded |
| Stereo channel separation |
|
| MAV 62 Series |
>80 dB @ 1 kHz |
| All other models |
>80 dB @ 20 Hz to 20 kHz |
| CMRR |
>75 dB @ 20 Hz to 20 kHz |
|
| Audio input — audio models |
| Number/signal type |
|
| MAV 44 AV, MAV 44 SVA, MAV 48 AV, MAV 48 SVA |
4 stereo, balanced/unbalanced |
| MAV 44 AV RCA, MAV 44 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA |
4 stereo, unbalanced |
| MAV 62 |
6 stereo, balanced/unbalanced |
| MAV 84 AV, MAV 84 SVA, MAV 88 AV, MAV 88 SVA |
8 stereo, balanced/unbalanced |
| MAV 84 AV RCA, MAV 84 SVA RCA, MAV 88 AV RCA, MAV 88 SVA RCA |
8 stereo, unbalanced |
| Connectors |
|
| MAV 44 AV, MAV 44 SVA, MAV 48 AV, MAV 48 SVA |
(4) 3.5 mm captive screw connectors, 5 pole |
| MAV 44 AV RCA, MAV 44 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA |
4 pairs of RCA female connectors |
| MAV 62 |
(6) 3.5 mm captive screw connectors, 5 pole |
| MAV 84 AV, MAV 84 SVA, MAV 88 AV, MAV 88 SVA |
(8) 3.5 mm captive screw connectors, 5 pole |
| MAV 84 AV RCA, MAV 84 SVA RCA, MAV 88 AV RCA, MAV 88 SVA RCA |
8 pairs of RCA female connectors |
| Impedance |
|
| MAV 62 Series |
>10k ohms unbalanced/balanced, DC coupled |
| All other models |
>18k ohms unbalanced, 24k ohms balanced, DC coupled |
| Nominal level |
|
| MAV 62 Series |
-10 dBV (316 mV, consumer level) |
| All other models |
Configurable: +4 dBu (1.23 V, professional level) or -10 dBV (316 mV, consumer level) |
| Maximum level |
|
| MAV 62 Series |
+19.5 dBu (balanced or unbalanced) at 1% THD+N |
| All other models |
>+20 dBu (captive screw models) at 1% THD+N
>+14 dBu (RCA models) at 1% THD+N |
| Input gain adjustment |
–18 dB to +10 dB, adjustable per input; default = 0 dB. (This is referenced to the internal bus signal level. It can be verified by measuring the unbalanced output level when the output level is set to "Consumer".) |
| NOTE |
|
0 dBu = 0.775 V(rms), 0 dBV = 1 V(rms), 0 dBV ≈ 2 dBu | |
|
| Audio output — audio models |
| Number/signal type |
|
| MAV 44 AV, MAV 44 SVA, MAV 84 AV, MAV 84 SVA |
4 stereo, balanced/unbalanced |
| MAV 44 AV RCA, MAV 44 SVA RCA, MAV 84 AV RCA, MAV 84 SVA RCA |
4 stereo, unbalanced |
| MAV 62 Series |
2 stereo, balanced/unbalanced |
| MAV 88 AV, MAV 88 SVA, MAV 48 AV, MAV 48 SVA |
8 stereo, balanced/unbalanced |
| MAV 88 AV RCA, MAV 88 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA |
8 stereo, unbalanced |
| Connectors |
|
| MAV 44 AV, MAV 44 SVA, MAV 84 AV, MAV 84 SVA |
(2) 3.5 mm captive screw connectors, 10 pole |
| MAV 44 AV RCA, MAV 44 SVA RCA, MAV 84 AV RCA, MAV 84 SVA RCA |
4 pairs of RCA female |
| MAV 62 Series |
(2) 3.5 mm captive screw connectors, 5 pole |
| MAV 88 AV, MAV 88 SVA, MAV 48 AV, MAV 48 SVA |
(4) 3.5 mm captive screw connectors, 10 pole |
| MAV 88 AV RCA, MAV 88 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA |
8 pairs of RCA female |
| Impedance |
50 ohms unbalanced, 100 ohms balanced |
| Gain error |
<±0.1 dB channel to channel |
| Nominal level |
Configurable: +4 dBu (1.23 V, professional level) or -10 dBV (316 mV, consumer level) |
| Maximum level (Hi-Z) |
|
| MAV 62 Series |
>+18 dBu, balanced; >+12 dBu, unbalanced at 1% THD+N |
| All other models |
>+24 dBu, balanced; >+18 dBu, unbalanced at 1%THD+N |
| Maximum level (600 ohm) |
|
| MAV 62 Series |
>+16 dBm, balanced; >+10 dBm, unbalanced at 1% THD+N |
| All other models |
>+19 dBm, balanced; >+13 dBm, unbalanced at 1%THD+N |
|
| Control/remote — switcher |
| Serial control port |
RS-232, 9-pin female D connector |
| Baud rate and protocol |
9600, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
|
| MAV 62 Series |
2 = TX, 3 = RX, 5 = GND |
| All other models |
2 = TX, 3 = RX, 5 = GND, 9 = hardwired IR |
| IR controller module (all models except MAV 62 Series) |
IR 501 remote control (optional) |
| Program control |
Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™) |
|
| General |
| Power |
100 VAC to 240 VAC, 50/60 Hz, 15 watts, internal, autoswitchable |
| Temperature/humidity |
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing |
| Rack mount |
|
| MAV 62 Series |
Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01 |
| All other models |
Yes, with included brackets, part #70-077-03
Also furniture mountable with an optional under-desk mounting kit, part #70-222-01 |
| Enclosure type |
Metal |
| Enclosure dimensions |
|
| MAV 62 Series |
1.75" H x 8.75" W x 9.5" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 24.1 cm D |
| All other models |
1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 21.6 cm D
(Depth excludes connectors. Width excludes rack ears.) |
| Product weight |
|
| MAV 62 Series |
3.3 lbs (1.5 kg) |
| All other models |
7.0 lbs (3.2 kg) |
| Shipping weight |
|
| MAV 62 Series |
6 lbs (3 kg) |
| All other models |
10 lbs (5 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
|
| MAV 62 Series |
CE |
| All other models |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| NOTE |
|
All nominal levels are at ±10%. | |
| NOTE |
|
Specifications are subject to change without notice. | |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
