|
 |
 |
|
 |
The Extron P/2 DA2xi is a one input, two output, high resolution VGA-QXGA distribution amplifier. Available in a compact and rugged metal enclosure, the P/2 DA2xi can be easily installed in small, tight places. It\'s even portable enough to fit into a briefcase for presenters on-the-go. The P/2 DA2xi offers 350 MHz (-3 dB) RGB video bandwidth and is compatible with VGA-UXGA graphic cards, monitors, and projectors. Adjustable gain and peaking are DIP switch-selectable.
The P/2 DA2xi can be powered via pin 9 of a computer\'s VGA connector. Pin 9 effectively becomes a +5VDC power source, provided the computer has a graphic card that complies with the VESA DDC standard, version 3. Using the included external desktop power supply also enables the P/2 DA2xi to work with older computers.
Housed in a quarter rack width enclosure, the flexible P/2 DA2xi can be combined with a variety of mounting options to meet the requirements of virtually any application or environment. Utilizing an optional VersaTools?or Universal Rack Shelf Kit, the DA can be rack-mounted alone or with three other quarter rack width A/V products. Additional mounting kits are available so the P/2 DA2xi can be mounted under a desk or next to a projector.
- Bandwidth ?350 MHz (-3 dB) RGB video bandwidth ensures signal
integrity.
- Compatibility ?Accepts all modes/resolutions of VGA-QXGA cards for
compatibility with VGA monitors and projectors.
- ID bits ?ID bits are routed to a local monitor output.
- Gain and peaking switch ?The P/2 DA2xi offers switchable gain and
peaking via a selectable DIP switch to help maintain signal integrity over long
distances.
- Switchable sync output impedance ?Compatible with virtually any
projector and cables.
- Power and source signal indicator ?A small LED light on the front
panel of the P/2 DA2xi designates whether or not it is receiving power and/or if
it is receiving a signal from a source ?both of which aid in troubleshooting.
- Input cable included ?The P/2 DA2xi includes an Extron high
performance detachable six-foot male-to-male VGA cable.
- Powered by computer VGA port (pin 9) or using the included external
international power supply (part# 70-055-01).
|
Video |
| Gain |
Selectable: 0.7V (unity), or 0.75V |
| Peaking |
Selectable: 0dB or 6dB @100 MHz |
| Bandwidth |
350 MHz (-3dB) |
|
Video input |
| Number/signal type |
1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs input |
| Connectors |
(1) 15-pin HD female |
| Nominal level |
0.7V p-p for RGB |
| Minimum/maximum levels |
Analog, 0.3V to 1.5V p-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 135 kHz |
| Vertical frequency |
30 Hz to 170 Hz |
| Return loss |
<-38dB @ 5 MHz |
| Maximum DC offset |
1.0V |
| Input coupling |
DC |
|
Video output |
| Number/signal type |
1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs output |
|
1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through
(i.d. bits are passed through) |
| Connectors |
(2) 15-pin HD female |
| Nominal level |
0.7V p-p for RGB at unity gain |
| Minimum/maximum levels |
Analog, 0.3V to 1.5V p-p |
| Impedance |
75 ohms |
| Return loss |
<-40dB @ 5 MHz |
| DC offset |
?mV maximum with input at 0 offset |
|
Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs |
| Input level |
1.5V to 5.0V p-p |
| Output level |
TTL, 4V to 5V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms or 55 ohms, switchable (output impedance resistors are 50
and 30 ohms) |
| Max input voltage |
5.0V p-p |
| Max. propagation delay |
60 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
|
General |
| Power |
P/2 DA2xi requires 0.1 A, and P/2 DA2xi MT requires 0.2 A |
|
via pin 9 of the VGA input of a PC that complies with VESA DCC
version 3 |
|
or 100VAC to 240VAC, 50/60 Hz, 5 watts, external,
autoswitchable; to 12VDC, 1 A power supply. |
| Temperature/humidity |
Storage -40?to +158캟 (-40?to +70캜) / 10% to 90%,
non-condensing |
|
Operating +32?to +122캟 (0?to +50캜) / 10% to 90%,
non-condensing |
| Rack mount |
Yes, with optional 1U rack shelf, part #60-190-01, or the
VersaTools rack shelf, |
|
part #60-190-20; also under-furniture mountable with optional
brackets #70-077-01 |
|
or projector mountable with bracket kit #70-077-04 (optional for
P/2 DA2xi, standard for P/2 DA2xi MT) |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.0" H x 4.3" W x 3.0" D (quarter rack width) |
|
2.5 cm H x: 10.9 cm W x 7.6 cm D |
|
(Depth excludes connectors.) |
| Product weight |
0.5 lbs (0.3 kg) |
| Shipping weight |
3 lbs (1.4 kg) |
| Vibration |
ISTA/NSTA 1A in carton (International Safe Transit
Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
|
|
|
 |
 |
|
|
|
|
|
|
|
|
)
