|
 |
 |
|
 |
The Extron DA6 YUV A is a one input, six output HDTV/component video and digital audio distribution amplifier for HDTV and DVD signal distribution. It accepts and distributes RGBS or RGsB, RsGsBs, component video, S-video, composite video, and digital audio on female BNC connectors. It also offers DIP switches for adjusting RGB gain and peaking, as well as for selecting AC or DC coupling. With 350 MHz (-3dB) video bandwidth, the DA6 YUV A is perfect for maintaining signal integrity over long cable runs. The DA6 YUV A includes an internal international power supply and is housed in a 1U, full rack width metal enclosure for mounting convenience.
350 MHz (-3dB) video bandwidth
Compatible with RGBS or RGsB, RsGsBs, HDTV/component video, S-video,
composite video, and digital audio
Rugged, metal enclosure
Internal international power supply
| DA2/4/6 RGBHV, DA6 YUV A |
|
| Video |
| Gain |
Unity (0 dB), or (1.1 dB) 110%, switch-selectable
(When input
= 0.7 V, output = 0.7 V or 0.8 V, respectively.) |
| Peaking |
0 dB or +6 dB at 100 MHz, switch-selectable |
| Bandwidth |
350 MHz (-3 dB), fully loaded |
| Differential phase
error |
<1.0?at 5 MHz |
| Differential gain
error |
<1.0% at 5 MHz |
|
| Video
input |
| Number/signal
type |
|
| DA6 YUV
A |
1 RGBS (only when the digital audio channel is not used), RGsB,
RsGsBs, component video, S-video, composite video |
| All other
models |
1 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite
video |
| Connectors |
|
| DA6 YUV
A |
3 or 4 BNC female (the fourth can be used for digital audio input
instead of video sync) |
| All other
models |
5 female BNC |
| Nominal level (at unity
gain) |
1 Vp-p for Y of component video and S-video, and for composite
video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and
for C of S-video |
| Minimum/maximum
levels |
Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal
frequency |
15 kHz to 180 kHz |
| Vertical
frequency |
15 Hz to 170 Hz |
| Return loss |
<-38 dB @ 5 MHz |
| DC offset (max.
allowable) |
5.0 V (in AC coupling mode) |
| Input
coupling |
AC/DC, switch-selectable |
|
| Video output |
| Number/signal
type |
|
| DA6 YUV
A |
6 RGBS (only when the digital audio channel is not used), RGsB,
component video, S-video, composite video (follows input type) |
| All other
models |
2, 4, or 6 RGBHV, RGBS, RGsB, RsGsBs, component video, S-video,
composite video (follows input type) |
| Connectors |
|
| DA6 YUV
A |
6 x 4 BNC female |
| All other
models |
(2, 4, or 6) x 5 BNC female |
| Nominal
level |
1 Vp-p for Y of component video and S-video, and for composite
video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and
for C of S-video |
| Minimum/maximum
levels |
0.3 Vp-p to 1.5 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-44 dB @ 5 MHz |
| DC offset |
? mV with input at 0 offset |
|
| Sync |
| Input/output
type |
|
| DA6 YUV
A |
RGBS (only when the digital audio channel is not used), RGsB,
RsGsBs |
| All other
models |
RGBHV, RGBS, RGsB, RsGsBs |
| Input level |
Analog or TTL: 0.5 V to 5 Vp-p |
| Output level |
TTL: 5 Vp-p, unterminated |
| Input
impedance |
510 ohms |
| Output
impedance |
75 ohms |
| Max. input
voltage |
5.0 Vp-p |
| Max. propagation
delay |
35 ns |
| Max. rise/fall
time |
4 ns |
| Polarity |
Positive or negative (follows input) |
|
| Digital audio ?DA6 YUV A only |
| NOTE |
|
Digital audio input/output is available when RGBS is
not used as the video input signal. | |
| Sampling
rates |
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, etcetera |
|
| Digital audio input ?DA6 YUV A only |
| Number/signal
type |
1 Dolby Digital, DTS, AES/EBU |
| Connectors |
1 BNC female |
| Impedance |
510 ohms |
| Nominal
level |
1 V (for consumer level) or 2 V (for professional
level) |
| Min./max. input
levels |
0.5 V to 5 Vp-p |
|
| Digital audio output ?DA6 YUV A only |
| Number/signal
type |
6 Dolby Digital, DTS, AES/EBU |
| Connectors |
6 BNC female |
| Impedance |
75 ohms |
| Output level |
2.5 Vp-p, 75 ohms terminated |
| Max. propagation
delay |
35 ns |
| Max. rise/fall
time |
4 ns |
| Polarity |
Positive or negative (follows input) |
|
| Control/remote ?distribution amplifier (not
applicable for DA6 YUV A) |
| Contact
closure |
(1) 9-pin female D connector |
| Contact closure pin
configurations |
Pin 1 = mute output #1, pin 2 = mute all outputs, pin 3 =
reserved,
pin 4 = mute output #2, pin 5 = GND, pin 6 = mute output #3,
pin 7 = mute output #4, pin 8 = mute output #5, pin 9 = mute output
#6 |
|
| General |
| Power |
100 VAC to 240 VAC, 50/60 Hz, 10 watts, internal,
autoswitchable |
| Temperature/humidity |
Storage: -40 to +158 캟 (-40 to +70 캜) / 10% to 90%,
noncondensing
Operating: +32 to +122 캟 (0 to +50 캜) / 10% to 90%,
noncondensing |
| Rack mount |
|
| DA2
RGBHV |
Yes, with optional 1U rack shelf, part #60-190-01 |
| All other
models |
Yes, with included brackets |
| Enclosure
type |
Metal |
| Enclosure
dimensions |
|
| DA2
RGBHV |
1.7" H x 8.7" W x 9.4" D (1U high, half rack wide)
4.3 cm H x
22.1 cm W x 23.9 cm D |
| All other
models |
1.75" H x 17.5" W x 8.5" D (1U high, full rack wide)
4.4 cm H
x 44.4 cm W x 21.6 cm D
(Depth excludes connectors.) |
| Product
weight |
|
| DA2
model |
2.0 lbs (0.9 kg) |
| DA4
model |
3.7 lbs (1.7 kg) |
| DA6
models |
3.9 lbs (1.8 kg) |
| Shipping
weight |
|
| DA2
model |
4 lbs (2 kg) |
| Other
models |
7 lbs (4 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit
Association) |
| Listings |
UL, CUL |
| Compliances |
CE, FCC Class A, VCCI, AS/NZS, ICES |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| NOTE |
|
All nominal levels are at
?0%. | |
| NOTE |
|
Specifications are subject to change without
notice. | |
| (7.51-081904-D4) |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
)
