The SMX DVI Pro Series Matrix Switcher Boards are designed for routing single link DVI-D video signals with HDCP – High-bandwidth Digital Content Protection.

The SMX DVI Pro Series Matrix Switcher Boards are designed for routing single link DVI-D video signals with HDCP – High-bandwidth Digital Content Protection. These HDCP-compliant matrix boards support computer video to 1920x1200 and HDTV to 1080p, and enable the routing of content from Blu-ray Disc players and other content-protected sources to one or more displays. SMX DVI Pro matrix boards provide +5 VDC, 250 mA of power on each output for external peripheral devices. For installation convenience and flexibility in cable selection, the boards are equipped with DVI-I connectors for inputs and outputs. They are available in four I/O sizes: 4x4, 4x8, 8x4, and 8x8.

Features

 

• HDCP compliant

•  

•  

•  

•  

•  

•  

Video  — SMX 44/48/84/88 DVI PRO
NOTE     *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
Routing
SMX 44 DVI PRO	4 x 4 matrix
SMX 48 DVI PRO	4 x 8 matrix
SMX 84 DVI PRO	8 x 4 matrix
SMX 88 DVI PRO	8 x 8 matrix
Gain	Unity
Resolution range	Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz
Signal type	Single link DVI digital video signals are supported.
Digital video	RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered  (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video)
NOTE     These SMX DVI PRO Series boards are not compatible with HDMI 1.3.
Digital audio	Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered.
Consumer Electronics Control (CEC)	Supports CEC wired infrared data pass-through using the HDMI 1.2 standard.
EDID and DDC	Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP	Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.2 standards
HPD	Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate	4.95 Gbps (1.65 Gbps per color)
Maximum pixel clock	165 MHz
Standards	DVI 1.0, HDMI 1.2
Switching speed	200 ns, max.
Video input  — SMX 44/48/84/88 DVI PRO
Number/signal type	4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*)
Connectors	4 or 8 female DVI-I (digital only)
Video output  — SMX 44/48/84/88 DVI PRO
Number/signal type	4 or 8 (depending on model) digital RGB
Connectors	4 or 8 female DVI-I (digital only)

General
Power	100 VAC to 240 VAC, 50/60 Hz, 200 watts, internal
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Fan, left to right (as viewed from front panel)
Rack mount	Yes
Enclosure type	Metal
Enclosure dimensions (Depth excludes connectors. Width excludes rack ears.)
SMX 300 BME	5.25" H x 17.0" W x 12" D (3U high, full rack wide) 13.3 cm H x 43.2 cm W x 30.5 cm D
SMX 400 BME	7.0" H x 17.0" W x 12" D (4U high, full rack wide) 17.8 cm H x 43.2 cm W x 30.5 cm D
SMX 500 BME	8.75" H x 17.0" W x 12" D (5U high, full rack wide) 22.2 cm H x 43.2 cm W x 30.5 cm D
Product weight with cards installed
SMX 300 BME	18.1 lbs (8.2 kg)
SMX 400 BME	20.3 lbs (9.2 kg)
SMX 500 BME	23.9 lbs (10.8 kg)
Shipping weight with cards installed
SMX 300 BME	22 lbs (10 kg)
SMX 400 BME	26 lbs (12 kg)
SMX 500 BME	30 lbs (14 kg)
DIM weight with cards installed, all models
	25 lbs (12 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, C-tick, CUL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
MTBF	30,000 hours