|
 |
 |
|
 |
본 제품은 별도의 옵션 보드를 장착해 원하는 메트릭스 스위치를 만들수 있는 제품입니다.
보드는 포함되있지 않은 프레임입니다.
지원보드 종류
OPTIONAL ACCESSORIES • SMX Stereo Audio Series Stereo Audio Matrix Switcher Boards
• SMX Blank Panels One and Two Slot False Faceplates for the SMX System MultiMatrix
• SMX DVI Series DVI Matrix Switcher Boards
• SMX DVI Pro Series HDCP-Compliant DVI-D Matrix Switcher Boards
• SMX FOX 4G Series FOX Fiber Optic Matrix Switcher Board
• SMX HDMI Series HDMI Matrix Switcher Boards
• SMX Multi-Rate SDI Series Multi-Rate Serial Digital Matrix Switcher Boards
• SMX S-video (4-pin DIN) Series S-Video Matrix Switcher Boards
• SMX Sync Series Sync Matrix Switcher Boards
• SMX Composite Video Series Composite Video Matrix Switcher Boards
• SMX VGA Series Wideband VGA Matrix Switcher Boards
• SMX Wideband Series Wideband Matrix Switcher Boards
• SMX S-video (2 BNC) Series S-video (Y/C) Matrix Switcher Boards
Key Features
• Choice of 3U, 4U, or 5U frames
• Single point of control for up to 10 separate switching planes
• Hot-swappable matrix board slots allow installation and replacement of matrix boards in four easy steps
• Field re-configurable and updateable
• 10 presets per switching plane
The SMX System MultiMatrix Series of multi-plane matrix switchers combines multiple, independent analog and digital matrix switchers in a truly modular, field-configurable frame. It supports up to 10 independent matrix boards, all under a single point of control. The SMX combines the proven reliability and high performance of Extron's popular CrossPoint 300, MAV Plus, HDXP Plus, and MVX Series matrix switchers with the efficiency of a modular matrix switcher design. The SMX System is an ideal choice for medical imaging systems, conference and training facilities, and other mid-sized applications that require the switching of different signal types and a cost-effective upgrade path for ongoing I/O or signal format changes.
The heart of the SMX System MultiMatrix is a field-configurable frame designed to facilitate the installation of new and replacement matrix switcher boards with a minimum of time and labor. The unique, hot-swappable card-cage design quickly aligns each matrix board on its own horizontal plane. Matrix boards can be installed without switcher disassembly, new firmware, or even the need to remove a previously-installed SMX switcher from the rack.
Three frames, available in 3U, 4U, and 5U sizes, provide six, eight, or ten matrix board slots, respectively. Simply select the combination of analog, wideband, digital, and stereo audio matrix boards that best fit the application, and then install them in, in any order, in one or more frames. As A/V signal routing needs change over time, choose new matrix boards to adapt the SMX to the new requirements.
- Choice of 3U, 4U, or 5U frames
- — Three frames provide six, eight, or ten matrix board slots, respectively.
-
- — A total of 10 matrix boards can be installed across multiple frames and controlled from a single SMX front panel controller or control port.
-
- — Matrix boards can be changed or added without the need to disconnect power or remove the SMX frame from the equipment rack.
-
- — Matrix boards can be installed, removed, or replaced in the field with a minimum amount of configuration and set up required.
-
- — Provides a discrete, backlit button for each input and output, allowing for simple, intuitive operation.
-
- — Frequently used I/O configurations may be saved and recalled either from the QS-FPC™ - QuickSwitch Front Panel Controller, IP Link, or serial control. This time-saving feature allows I/O configurations to be set up and stored in memory for future use.
-
- — Up to 10 presets per switching plane can be saved and recalled without affecting the other I/O plane connections.
-
- — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the switcher from the front panel controller.
-
- — Switching planes can be grouped together to make a single, virtual switching plane. Plane grouping allows several signal planes to act as a single unit with a single control command affecting all planes.
-
- — Using serial commands, the SMX System MultiMatrix can be controlled and configured via the included Windows-based control software, or integrated into third-party control systems. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 and RS-422 port also makes it easy to install firmware updates.
-
- — A 2.5mm mini jack is available for set-up and configuring the SMX without having to access the unit from behind the rack.
-
- — Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 and RS-422 remote control. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may be saved for future downloading to the matrix switcher.
-
- — Engineered to meet the needs of professional A/V environments, IP Link enables the SMX System MultiMatrix to be proactively monitored and managed over a LAN, WAN, or the Internet, using standard TCP/IP protocols. IP Link provides for remote selection of input and output ties, adjustment and control of audio input and output levels, and advanced system diagnostics.
-
- — All SMX System MultiMatrix Switchers are housed in 19-inch wide metal enclosures.
-
- — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility.
| SMX System MultiMatrix Switchers |
| |
| Video — composite video (SMX 84/88/1616 V) |
| Routing |
|
| SMX 84 V |
8 x 4 matrix |
| SMX 88 V |
8 x 8 matrix |
| SMX 1616 V |
16 x 16 matrix |
| Gain |
Unity |
| Bandwidth |
150 MHz (-3 dB), fully loaded |
| Differential phase error |
1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error |
1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk |
-50 dB @ 5 MHz |
| Switching speed |
100 ms (max.) |
| |
| Video input — composite video (SMX 84/88/1616 V) |
| Number/signal type |
8 or 16 composite video |
| Connectors |
8 or 16 female BNC |
| Nominal level |
1 Vp-p for composite video |
| Minimum/maximum levels |
Analog: 0.5 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
1.5 V |
| |
| Video output — composite video (SMX 84/88/1616 V) |
| Number/signal type |
4, 8, or 16 composite video |
| Connectors |
4, 8, or 16 BNC female |
| Nominal level |
1 Vp-p for composite video |
| Minimum/maximum levels |
0.0 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
-30 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| |
| Sync — composite video (SMX 84/88/1616 V) |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
| |
| Video — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Routing |
|
| SMX 84 SV/YC |
8 x 4 matrix |
| SMX 88 SV/YC |
8 x 8 matrix |
| SMX 1616 SV/YC |
16 x 16 matrix |
| Gain |
Unity |
| Bandwidth |
150 MHz (-3 dB), fully loaded |
| Differential phase error |
1.0° at 3.58 MHz and 4.43 MHz |
| Differential gain error |
1.0% at 3.58 MHz and 4.43 MHz |
| Crosstalk |
-50 dB @ 5 MHz |
| Switching speed |
100 ms (max.) |
| |
| Video input — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Number/signal type |
8 or 16 S-video |
| Connectors |
|
| SMX 84/88/1616 SV |
8 or 16 female 4-pin mini DIN |
| SMX 84/88/1616 YC |
8 or 16 x 2 female BNC |
| Nominal level |
1 Vp-p for Y S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
Analog: 0.5 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
1.5 V |
| |
| Video output — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Number/signal type |
4, 8, or 16 S-video |
| Connectors |
|
| SMX 84/88/1616 SV |
4, 8, or 16 female 4-pin mini DIN |
| SMX 84/88/1616 YC |
4, 8, or 16 x 2 female BNC |
| Nominal level |
1 Vp-p for Y S-video
0.3 Vp-p for C of S-video |
| Minimum/maximum levels |
0.0 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
-30 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| |
| Sync — S-video (SMX 84/88/1616 SV, SMX 84/88/1616 YC) |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
| |
| Video — ultra-wideband (SMX 84/88/1616 WB) |
| Routing |
|
| SMX 84 WB |
8 x 4 matrix |
| SMX 88 WB |
8 x 8 matrix |
| SMX 1616 WB |
16 x 16 matrix |
| Gain |
Unity |
| Bandwidth |
350 MHz (-3 dB), fully loaded |
| Crosstalk |
-80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @30 MHz, -37 dB @ 100 MHz |
| Switching speed |
200 ms (max.) |
| |
| Video input — ultra-wideband (SMX 84/88/1616 WB) |
| Number/signal type |
8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsB |
| Connectors |
8 or 16 female BNC |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
1.5 V |
| |
| Video output — ultra-wideband (SMX 84/88/1616 WB) |
| Number/signal type |
4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsB |
| Connectors |
4, 8, or 16 female BNC |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
0 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| Switching type |
Triple-Action |
| |
| Sync — SMX 88 SYNC, SMX 88 H+V, SMX 1616 SYNC |
| Input type |
|
| SMX 88 SYNC, SMX 1616 SYNC |
Composite sync (S) |
| SMX 88 H+V |
Separate H and V sync |
| Output type (follows input) |
|
| SMX 88 SYNC, SMX 1616 SYNC |
Composite sync (S) |
| SMX 88 H+V |
Separate H and V sync |
| Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level |
AGC to TTL: 4.0 V to 5.0 V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Max. propagation delay |
30 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
| |
| Video — VGA (SMX 84/88/1616 VGA) |
| Routing |
|
| SMX 84 VGA |
8 x 4 matrix |
| SMX 88 VGA |
8 x 8 matrix |
| SMX 1616 VGA |
16 x 16 matrix |
| Gain |
Unity |
| Bandwidth |
300 MHz (-3 dB), fully loaded |
| Crosstalk |
-55 dB @ 10 MHz |
| Switching speed |
200 ms (max.) |
| |
| Video input — VGA (SMX 84/88/1616 VGA) |
| Number/signal type |
8 or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsB |
| Connectors |
8 or 16 female 15-pin HD |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.3 V to 1.5 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset (max. allowable) |
1.5 V |
| |
| Video output — VGA (SMX 84/88/1616 VGA) |
| Number/signal type |
4, 8, or 16 VGA-QXGA RGBHV, RGBS, RGsB, RsGsB |
| Connectors |
4, 8, or 16 female 15-pin HD |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
0 V to 2.0 Vp-p (follows input) |
| Impedance |
75 ohms |
| Return loss |
<-30 dB @ 5 MHz |
| DC offset |
±5 mV with input at 0 offset |
| Switching type |
Triple-Action |
| |
| Sync — VGA (SMX 84/88/1616 VGA) |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs (follows input) |
| Input level |
0.5 V to 5.0 Vp-p, 4.0 Vp-p normal |
| Output level |
AGC to TTL: 4.0 V to 5.0 V p-p, unterminated |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 150 kHz |
| Vertical frequency |
30 Hz to 150 Hz |
| Max. propagation delay |
30 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative (follows input) |
| |
| Digital video — SMX 44/84/88/1616 SDI |
| Routing |
|
| SMX 44 HD SDI |
4 x 4 matrix |
| SMX 84 HD SDI |
8 x 4 matrix |
| SMX 88 HD SDI |
8 x 8 matrix |
| SMX 1616 HD SDI |
16 x 16 matrix |
| Gain |
Unity |
| Maximum data rate |
2.97 Gbps |
| Data types |
8 or 10 bit |
| Operation standards |
SMPTE 292M, SMPTE 259M, SMPTE 424M, ITU-RBT.601, ITU-RBT.1120 |
| |
| Digital video input — SMX 44/84/88/1616 SDI |
| Number/signal type |
4, 8, or 16 single link SDI, HD-SDI; or dual link HD-SDI |
| Connectors |
4, 8, or 16 BNC female |
| Nominal level |
0.80 Vp-p ± 10% |
| Impedance |
75 ohms |
| Return loss |
<-15 dB @ 1 MHz to 1.5 GHz |
| Equalization |
Automatic |
| Input cable equalization distance |
| HD-SDI |
|
| Extron SHR, Belden 1694A cable |
492' (150 m) |
| Extron HR, Belden 1505A cable |
328' (100 m) |
| SDI |
|
| Extron SHR, Belden 1694A cable |
984' (300 m) |
| Extron HR, Belden 1505A cable |
656' (200 m) |
| NOTE |
The transmission distance varies depending on the signal resolution and on the type of cable, graphic card, and display used in the system. |
|
| |
| Digital video output — SMX 44/84/88/1616 SDI |
| Number/signal type |
4, 8, or 16 single link SDI, HD-SDI; or dual link HD-SDI |
| Connectors |
4, 8, or 16 BNC female |
| Nominal level |
0.80 Vp-p ± 10% |
| Impedance |
75 ohms |
| Return loss |
<-15 dB @ 1 MHz to 1.5 GHz |
| DC offset |
±0.5 V with input at 0 offset |
| Re-clocking |
Automatic, or use available bypass mode for nonstandard rates |
| Jitter |
<0.2 VI |
| Rise/fall time (20-80%) |
|
| SDI |
700 ps ±100 ps |
| HD-SDI |
250 ps ±100 ps |
| |
| Video — SMX 44/48/84/88 DVI |
| NOTE |
*Appropriate DVI-D-to-HDMI cables or adapters are required for HDMI signal input/output. |
|
| Routing |
| SMX 44 DVI |
4 x 4 matrix |
| SMX 48 DVI |
4 x 8 matrix |
| SMX 84 DVI |
8 x 4 matrix |
| SMX 88 DVI |
8 x 8 matrix |
| Gain |
Unity |
| Maximum data rate |
4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock |
165 MHz |
| Resolution range |
Up to 1920x1200 @ 48, 50, or 60 Hz; or 1080p @ 60 Hz |
| Signal type |
Single link DVI digital video signals are supported. |
| Digital video |
RGB digital video (DVI standards), actively buffered (supports all single link DVI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE |
These SMX DVI Series boards are not compatible with HDMI 1.3. |
|
| Digital audio |
Not supported |
| Consumer Electronics Control (CEC) |
Not supported |
| EDID and DDC |
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP |
Not supported |
| HPD |
Supports hot plug detection (HPD) of display as a pass-through signal. |
| Standards |
DVI 1.0, HDMI 1.2 |
| |
| Video input — SMX 44/48/84/88 DVI |
| Number/signal type |
4 or 8 single link DVI-D (or HDMI*) |
| Connectors |
4 or 8 female DVI-I |
| Equalization |
Automatic |
| Input cable length |
>50' (15.24 m) at 1920x1200 @ 48, 50, or 60 Hz; or 1080p |
| |
| Video output — SMX 44/48/84/88 DVI |
| Number/signal type |
4 or 8 single link DVI-D (or HDMI*) |
| Connectors |
4 or 8 female DVI-I |
| |
| Video — SMX 44/48/84/88 DVI PRO |
| NOTE |
*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. |
|
| Routing |
|
| SMX 44 DVI PRO |
4 x 4 matrix |
| SMX 48 DVI PRO |
4 x 8 matrix |
| SMX 84 DVI PRO |
8 x 4 matrix |
| SMX 88 DVI PRO |
8 x 8 matrix |
| Gain |
Unity |
| Resolution range |
Up to 1080p (HDTV) or 1920x1200 (the highest resolution of the single link DVI standard) @ 60 Hz |
| Signal type |
Single link DVI digital video signals are supported. |
| Digital video |
RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI and HDMI (if using an optional adapter) standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| NOTE |
These SMX DVI PRO Series boards are not compatible with HDMI 1.3. |
|
| Digital audio |
Supports HDMI audio (if using an HDMI to DVI adapter) transmitted through the RGB and Y, Cr, Cb lines, actively buffered. |
| Consumer Electronics Control (CEC) |
Supports CEC wired infrared data pass-through using the HDMI 1.2 standard. |
| EDID and DDC |
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP |
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.2 standards |
| HPD |
Supports hot plug detection (HPD) of display as a pass-through signal. |
| Maximum data rate |
4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock |
165 MHz |
| Standards |
DVI 1.0, HDMI 1.2 |
| Switching speed |
200 ns, max. |
| |
| Video input — SMX 44/48/84/88 DVI PRO |
| Number/signal type |
4 or 8 (depending on model) digital RGB single-link DVI-D (or HDMI*) |
| Connectors |
4 or 8 female DVI-I (digital only) |
| |
| Video output — SMX 44/48/84/88 DVI PRO |
| Number/signal type |
4 or 8 (depending on model) digital RGB |
| Connectors |
4 or 8 female DVI-I (digital only) |
| |
| Video — SMX 44/48/84/88 HDMI |
| NOTE |
*Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. |
|
| Routing |
|
| SMX 44 HDMI |
4 x 4 matrix |
| SMX 48 HDMI |
4 x 8 matrix |
| SMX 84 HDMI |
8 x 4 matrix |
| SMX 88 HDMI |
8 x 8 matrix |
| Gain |
Unity |
| Resolution range |
Up to 1920x1200 or 1080p @ 60 Hz |
| Signal type |
Single link HDMI (or DVI-D*) |
| Digital video |
RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1600x1200 @ 60 Hz computer video) |
| Digital audio |
Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered. |
| Consumer Electronics Control (CEC) |
Supports CEC wired infrared data pass-through using the HDMI 1.2 standard. |
| EDID and DDC |
Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. |
| HDCP |
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.2 standards |
| HPD |
Supports hot plug detection (HPD) of display as a pass-through signal. |
| Maximum data rate |
4.95 Gbps (1.65 Gbps per color) |
| Maximum pixel clock |
165 MHz |
| Switching speed |
200 ns, max. |
| |
| Video input — SMX 44/48/84/88 HDMI |
| Number/signal type |
4 or 8 (depending on model) digital RGB single li
|
|
 |
 |
|
|
|
|
|
|
|
|
|
)
