The Extron RGB-HDMI 300 is a high performance RGB to HDMI scaler that converts incoming analog component video and RGBHV signals to HDMI signals.
Key Features
?RGB and HDTV component video to HDMI scaling
?61 selectable output rates up to 1920x1200, including HDTV 1080p/60
?Auto-Image?setup
?Auto Input Memory
?Picture controls for brightness, contrast, detail, horizontal and vertical positioning, sizing, and zoom
?On-screen display
The Extron RGB-HDMI 300 is a high performance RGB to HDMI scaler that converts incoming analog component video and RGBHV signals to HDMI signals. It accepts HDTV and high resolution computer-video signals up to 1920x1200, and offers multiple, selectable HDMI output rates up to 1920x1200, including HDTV 1080p/60. The RGB-HDMI 300 is housed in a compact, low-profile enclosure for placement behind flat-panel displays, and offers several features for streamlining integration and enhancing system operation, including Auto Input Memory, Auto-Image?setup, and RS-232 serial control.
The RGB-HDMI 300 is ideal for various applications where newer consumer-based displays, equipped only with HDMI inputs, are to be used with sources that output analog RGB computer-video, or in an environment with an existing analog RGB signal distribution infrastructure. It can also be used in systems where consolidation of various source signals to a single, common output resolution is desired. For example, the RGB-HDMI 300 can be installed at the output of a switcher, with its HDMI output feeding the display.
In addition to high performance scaling, the RGB-HDMI 300 includes several integrator friendly features for expediting set-up and system operation. An on-screen display facilitates display of information pertaining to the incoming signal and adjustment of picture settings, including positioning, size, zoom, brightness, contrast, and detail. Internal test patterns are available for calibration and setup. Configurations can be conveniently saved and recalled from up to three memory presets from the front panel, and up to 16 additional presets through RS-232 serial control.
With Auto Input Memory, the RGB-HDMI 300 automatically stores image settings for each new incoming signal. When the signal is recognized again from a newly connected source, image settings are automatically restored. Auto-Image, a feature common to many Extron scalers and signal processors, allows for quick and easy set-up of incoming analog RGB signals.
The RGB-HDMI 300 features RS-232 serial control with front and rear ports. It is housed in a 1" high, half rack width enclosure that allows for discreet installation, such as behind a flat panel display or above a projector.
- RGB and HDTV component video to HDMI scaling
-
-
-
-
-
-
- ?The output rate can be selected manually using the on-screen menu system or via RS-232 serial control. It can also be automatically selected based on the display EDID, or set to match the incoming signal rate.
-
- ?For expedited presentation set-up, the RGB-HDMI 300 automatically optimizes the image by analyzing and then adjusting to the incoming source, eliminating complex and time-consuming set-up procedures.
-
- ?When activated, the RGB-HDMI 300 automatically stores size, position, contrast, brightness, and detail information based on the incoming signal. When the same signal is detected again, these image settings are automatically recalled from memory.
-
-
-
-
-
- ?Three memory presets are available to store and recall sizing, centering, detail, contrast, and brightness information. An additional 16 memory presets are available via RS-232 serial control.
-
- ?The RGB-HDMI 300 features an on-screen display which displays status information pertaining to the currently selected input, and facilitates easy adjustment of picture settings.
-
- ?Using serial commands, the RGB-HDMI 300 can be controlled and configured via the Extron Windows?based control program, or integrated into third-party control systems. Extron products use the SIS?- Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming.
-
- ?Nine test patterns are available, including a crop pattern, color bars, alternating pixels, and four film aspect ratio patterns - 1.33, 1.78, 1.85, and 2.35.
-
- ?This feature locks out all front panel functions; all functions however, are available through RS-232 control.
-
- ?With a low profile enclosure, the RGB-HDMI 300 can be discreetly installed, such as behind a plasma or LCD flat-panel display.
-
- ?Provides worldwide power compatibility.
| RGB-DVI 300, RGB-HDMI 300 |
| |
| Video input |
| Number/signal type |
1 RGBHV |
| Connectors |
1 female 15-pin HD |
| Nominal level |
0.7 Vp-p for RGB |
| Minimum/maximum levels |
Analog: 0.0 V to 2.0 Vp-p with no offset |
| Impedance |
75 ohms |
| Horizontal frequency |
30 kHz to 100 kHz |
| Vertical frequency |
50 Hz to 120 Hz |
| Resolution range |
640x480 to 1920x1200* or 480p, 576p, 720p, 1080i, or 1080p |
| NOTE |
*Only the reduced blanking version of the 1920x1200 resolution is sampled at full bit rate. |
|
| Formats |
RGB and YCbCr |
| Return loss |
<-30 dB @ 5 MHz |
| |
| Video processing |
| Digital sampling |
24 bit, 8 bits per color; 162 MHz standard |
| Colors |
16.78 million |
| |
| Video output |
| Number/signal type |
|
| RGB-DVI 300 |
1 single link DVI-D |
| RGB-HDMI 300 |
1 single link HDMI |
| Connectors |
|
| RGB-DVI 300 |
1 female DVI-I (digital output only) |
| RGB-HDMI 300 |
1 female HDMI |
| Scaled resolutions |
640x4804,5,6, 800x6004,5,6, 852x4804,5,6, 1024x7684,5,6, 1024x8524,5,6, 1024x10244,5,6, 1280x7684,5,6, 1280x8004,5,6, 1280x10244,5,6, 1360x7654,5,6,1365x7684,5,6, 1365x10244,5,6, 1366x7684,5,6, 1400x9004,5,6, 1400x10504,5, 1600x12004,5, 1680x10504,5, 1920x12004,5, 480p5, 576p4, 720p3,6, 1080p1,2,3,4,5, 1080i4,5
1 = at 24 Hz, 2= at 25 Hz, 3 = at 30 Hz, 4 = at 50 Hz, 5 = 60 Hz, 6 = 75 Hz;
or automatically selected resolution based on display EDID data;
or locked to the input's resolution and refresh rate |
| Formats |
RGB and YCbCr digital video |
| |
| Sync |
| Input type |
RGBHV |
| Output type |
DVI-D or HDMI digital video |
| Standards |
SMPTE 259M, SMPTE 929, SMPTE 372, DVI 1.0, HDMI 1.2 |
| Input level |
0 V to 5.0 Vp-p |
| Input impedance |
1k ohms |
| |
| Control/remote ?decoder |
| Serial control ports |
1 RS-232, 3.5 mm captive screw connector, 3 pole (rear panel)
1 RS-232, 2.5 mm mini stereo jack (front panel) |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configurations |
1 = TX, 2 = RX, 3 = GND |
| Program control |
Extron's control/configuration program for Windows?lt;BR>Extron's Simple Instruction Set (SIS?lt;/SUP>) |
| |
| General |
| External power supply |
100 VAC to 240 VAC, 50/60 Hz, external; to 12 VDC, 2 A, regulated |
| Power input requirements |
12 VDC, 0.8 A |
| Temperature/humidity |
Storage -40?to +158캟 (-40?to +70캜) / 10% to 90%, noncondensing
Operating +32?to +122캟 (0?to +50캜) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
|
| Rack mount |
Yes, with optional 1U, 9.5" deep rack shelf (RSU 129, #60-190-01; RSB 129, 60-604-01); or 1U, 6" deep rack shelf (RSU 126, #60-190-10; RSB 126, 60-604-10) |
| Furniture mount |
Furniture or wall mountable using optional MBU 125 mounting kit, part #70-077-01 |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.0 H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors and knobs.) |
| Product weight |
1.6 lbs (0.7 kg) |
| Shipping weight |
4 lbs (2 kg) |
| Vibration |
ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, CUL, C-tick, UL |
| EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
| Environmental |
Complies with the appropriate requirements of WEEE. |
| MTBF |
30,000 hours |
|
)
