|
 |
 |
|
 |
|
Extron's Lancia xi is a high-resolution, digital video line doubler that converts interlaced video into non-interlaced video. The line doubler converts the two-field frame into a single 525-line non-interlaced frame producing a brighter, smoother higher resolution picture. The additional lines provide greater light output and make the overall image smother and more film-like.
The Lancia xi has a high quality three-line adaptive comb filter that eliminates most of the chroma noise found in standard composite video signals. In addition, an internal TBC (time base corrector) actually cleans up low quality videotape signal noise (common to consumer VHS decks) for a more stable and sharper image. Motion mode compensation virtually eliminates the jaggies commonly found on video line doublers so that the image is smoother. With these features the Lancia xi provides an output that is superior to any other line doubler in its class.
The Lancia xi also features an internal two-input switcher—one S-video and one composite video input. Both are front panel-selectable, remote-selectable, and autoswitchable. With the use of a high quality quad-standard decoder, the Lancia xi is compatible with all international video formats including NTSC 3.58, NTSC 4.43, PAL, and SECAM.
| Video input |
| Number/signal type |
1 S-video, 1 composite video |
| Connectors |
1: 4-pin mini-DIN female S-video |
| |
1 BNC female: composite video |
| Minimum/maximum levels |
0V to 2.0V p-p with no offset |
| Impedance |
75 ohms |
| Return loss |
-30dB @ 5 MHz |
| Video output |
| Number/signal type |
1 RGBHV (non-interlaced) |
| Connectors |
5 BNC female |
| Minimum/maximum levels |
0V to 0.7V p-p |
| Impedance |
75 ohms |
| Return loss |
-30dB @ 5 MHz |
| DC offset |
±0.1V maximum with input at 0 offset |
| Sync |
| Output type |
RGBHV, RGBS, RGsB |
| Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Output level |
TTL: 4.0V to 5.0V p-p |
| Output impedance |
75 ohms |
| Horizontal output frequency |
NTSC 3.58/4.43: 31.5 kHz |
| |
PAL/SECAM: 31.25 kHz |
| Vertical output frequency* |
NTSC 3.58/4.43: 60 Hz* |
| |
PAL/SECAM: 50 Hz* |
| |
*When VGA mode is active, vertical frequency is forced to 60 Hz with any video input. |
| Polarity |
H & V: positive or negative (DIP switch-selectable) |
| |
Composite sync: negative |
| Control/remote — line doubler |
| Serial control port |
RS-232: 9-pin female D connector |
| Baud rate and protocol |
9600, 8-bit, 1 stop bit, no parity |
| Serial control pin configurations |
2 = TX, 3 = RX, 5 = GND |
| Contact closure |
9-pin female D connector |
| Program control |
Extron's control program for Windows® |
| |
Extron's Simple Instruction Set™ _ SIS™ |
| General |
| Power |
100VAC to 240VAC, 50/60 Hz, 15 watts, internal, auto-switchable |
| Temperature/humidity |
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
| |
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing |
| Rack mount |
Yes, with optional 1U rack shelf, part #60-190-01 |
| Enclosure type |
Metal |
| Enclosure dimensions |
1.75" H x 8.75" W x 9.4" D: (1U high, 1/2 rack width) |
| |
4.4 cm H x 22.2 cm W x 23.9 cm D |
| |
(Depth excludes connectors and knobs.) |
| Product weight |
3.0 lbs (1.4 kg) |
| Shipping weight |
6 lbs (2.7 kg) |
| Vibration |
ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Listings |
UL, CUL |
| Compliances |
CE |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
| (7.31-110701-D1) |
|
|
 |
 |
|
|
|
|
|
|
|
|
)
