The Extron FOX 500 Fiber Optic Extender is a transmitter and receiver set for long haul transmission of high resolution RGB, audio, and RS-232 control signals over a single fiber. Engineered for reliability and exceptional high resolution image performance, it uses Extron's exclusive all digital, zero compression technology, to deliver perfect pixel-by-pixel transmission of computer-video images up to UXGA (1600x1200) resolution. Designed specifically for A/V systems, the FOX 500 also includes a host of integrator-friendly features such as image adjustments and calibration, dual RGB and audio outputs at the receiver, RS-232 control from multiple locations, rack-mount capability, and real-time system monitoring.

The FOX 500 is ideal for a wide range of applications requiring long distance transmission of high resolution content with the highest quality. Because transmission of content is inherently secure and immune to outside interference, fiber applications are favored in government, military, and medical environments. The FOX 500 transmitter and receiver feature industry standard LC-type connectivity.

The FOX 500 MM supports multimode fiber at 850 nm, which is typically used within buildings or facilities with moderate-range transmission distances up to 150 meters (492 feet). The FOX 500 SM supports singlemode as well as multimode fiber at 1310 nm. Singlemode fiber offers long-range transmission capability over extreme distances of up to 30 km (18.75 miles). It is used in very large facilities such as airports and stadiums, as well as connecting over very long distances between facilities such as university campuses.

For convenient integration into A/V systems, the FOX 500 transmitter accepts, digitizes, and transmits all RGB format signals – RGBHV, RGBS, RGsB, and RsGsBs, along with unbalanced or balanced stereo audio and RS-232 control signals. The transmitter also provides controls for optimizing video and audio signals. The FOX 500 receiver features dual RGB and stereo audio outputs which reduces additional A/V equipment requirements, as well as sync format conversion for RGBHV, RGBS, or RGsB output.

At the FOX 500 transmitter, both transmitter and receiver can be controlled and configured through RS-232. With a second fiber link installed, functions for both units can be controlled at either location. Since the units are typically situated far apart, this capability adds considerable versatility, enabling adjustment and calibration of video and audio at the receiver. It also allows for verification of fiber link status between the units as well as the presence of RGB and audio input signals at the transmitter.

DVI-to-Analog RGB and Analog RGB-to-DVI Conversion

The FOX 500 transmitter and receiver are available separately. Either device can be paired with the FOX 500 DVI transmitter or receiver to provide ultra-long distance conversion of DVI-D signals to analog RGB and vice versa.

Features

• Extends RGBHV, stereo audio, and RS-232 control signals very long distances over a single fiber

• Inputs: RGBHV, RGBS, RGsB, or RsGsBs on BNCs or 15-pin HD with buffered input loop-through on 15-pin HD; unbalanced stereo audio on 3.5 mm stereo mini jack and balanced/unbalanced stereo audio on captive screw connector - FOX 500 Tx

• Outputs: RGBHV, RGBS, or RGsB on BNCs and 15-pin HD; unbalanced stereo audio on 3.5 mm stereo mini jack and balanced stereo audio on captive screw connector - FOX 500 Rx

• All digital, zero compression technology provides pixel-for-pixel performance with signals up to 1600x1200 — The FOX 500 delivers uncompressed pixel-for-pixel transmission of video signals to ensure optimal image quality at resolutions up to UXGA (1600x1200). Signal resolutions higher than UXGA can be accommodated, but will not be sampled at a 1:1 pixel ratio.

• Industry standard LC connectors provide reliable physical connectivity and precise fiber core alignment

• Alarm notification for fiber link loss — The FOX 500 can be set up to trigger an external control system for immediate notification when a fiber link has been lost. Requires second fiber link.

• Available as a 850 nm multimode model for moderate-range transmissions, and a 1310 nm singlemode model for extreme distances up to 30 km (18.75 miles)

• Second fiber link enables bi-directional RS-232 pass-through, control from either location, and real-time system monitoring

• Buffered input loop-through — A buffered input loop-through on the FOX 500 transmitter provides an output signal to drive a local monitor.

• Dual RGB and stereo audio outputs

• 30 user memory presets — These presets are available for saving and recall of size, position, and detail information for multiple incoming sources. The ability to save and recall presets is useful in switcher-based environments.

• Active PC audio to balanced audio interfacing

• Audio gain & attenuation adjustment and muting capability

• RS-232 serial control at transmitter and receiver — The FOX 500 transmitter and receiver feature front and rear panel RS-232 serial ports for control and configuration. The second fiber link allows for control of both units at either location, as well as remote verification of fiber link status and the presence of input RGB and audio signals.

• Internal test patterns for calibration and setup — Three test patterns are available, including grayscale, color bars, and alternating pixels.

• Auto-Image™ automatically optimizes output — A press of a button automatically adjusts the sizing, centering, and filtering to optimize the output image. This can save time and effort in fine tuning displayed images. Requires second fiber link.

• Real-time status LED indicators for troubleshooting and monitoring — LEDs on the transmitter and receiver front panels verify the presence of RGB and audio signals at the transmitter as well as active fiber links between the units. Requires second fiber link.

• Front panel security lockout — This feature locks out all front panel functions; all functions however, are available through RS-232 control.

• Compatible with FOX 500 DVI transmitter and receiver — Enables ultra-long distance DVI-to-analog RGB and analog RGB-to-DVI conversion without the need for extra signal conversion devices.

• Rack-mountable 1U, half rack width metal enclosures

• Internal international power supply — The 100-240VAC, 50/60 Hz, universal power supply provides worldwide power compatibility.